User Manual

23 | Compressor™ Onvif Encoder
4.2 SYSTEM
4.2.1
System
Setup the system’s basic settings and update the firmware.
Figure 4-3 SYSTEM > System > System
Table 4-2 SYSTEM > System > System Item and Description
No.
Name
Function
1 Language Set the system’s language.
2 Device name Enter the device’s name (English characters only).
3 Video type Select image standard types (NTSC or PAL).
4 Keyboard ID Select keyboard ID (1~255).
5 System start If enabled the encoder will run the setup wizard every time it reboots.
6 Run Run the setup wizard.