User Manual

17 | Compressor™ Onvif Encoder
3.3.1
PTZ control
For PTZ cameras connected to the encoder, use the PTZ control to move the camera and adjust settings as
needed.
Note
To enable PTZ Control menu, go to
DEVICE > PTZ
in the upper live screen.
Figure 3-5 Quick menu > PTZ control
Table 3-5 Quick menu > PTZ control item and description
No.
Item
Description
1 Move the camera’s view with direction buttons.
2 Move the camera’s view with PTZ ball.
3 AF Adjust screen focus automatically.
4 Zoom out
Zoom function on supported PTZ camera.
5
Zoom in
6
IRIS off
Adjust iris in the camera on supported models.
7 IRIS on
8 Focus far
Manual focus adjustment on supported models.
9
Focus near
10 Open the camera’s menu.