User Manual

11 | Compressor™ Onvif Encoder
2.2 Starting the system
Once all external devices have been connected to the back of the encoder, and the encoder has been added to
the network properly, per the example above, power up the encoder and begin the quick setup wizard.
1
When the encoder boots up, it will be in protective mode. You will not be able to access the encoder’s setup
menu until you login using the proper username and password.
2
To unlock the encoder, right-click anywhere on the screen. The login screen will appear. (Default user name /
password: admin / admin)
3
When the encoder boots up for the first time, you will be guided through the Startup Wizard. It is highly
recommended that you change your password after initial setup for security purposes.
Note
Default user name and password are admin/admin.
Click to see the encoder’s MAC address.
If you lost your password, contact DW’s technical support to reset it.
Attention
Please change password after login due to security.
2.3 Quick Setup
The quick setup wizard helps users setup the encoder’s main settings, including account setup, system settings,
network settings and date and time settings.
2.3.1
Account
1
Click the keyboard icon to set
a new user name
and
password
. It is highly recommended to change the
default admin password.
2
Press
OK, then Save
to save the changes.
3
Press
Next
button to end Account setting.