User Manual

ManualsBrandsDigital Watchdog ManualsEncoders & Decoders16-Channel HD and Legacy Analog to IP Signal Encoder

1

2

3

4

5

6

7

8

9

Table Of Contents

User manual | 10

7

Connect a network cable to the network port.

8

Connect an alarm and RS485 devices to the terminal block as needed.

9

Connect a USB mouse to either one of the USB ports in front panel of the unit.

10

Once all external devices are connected properly, connect the encoder to an adequate power supply using the

included cables.

Note

The encoder does not have a power button. The system boots up automatically upon

connection to an external power source.