User Manual

Web interface - Timer / Heartbeat
5.4.4. Timer / Heartbeat
The timer / heartbeat is a tampering alarm used to detect a cable break or product malfunction by periodically send-
ing a short message to the server.
To setup a timer / heartbeat alarm:
1. In the Alarm settings tab, click on ‘Add alarm’.
2. Select ‘Timer/heartbeat’ from the ‘Input’ drop-down menu.
3. Enter an alarm name for the new alarm.
4. Enter the time interval in seconds. This will indicate how often the system will send a short message to the server.
5. Click ‘Add alarm’ to save the new alarm settings.
To add an action for a timer/heartbeat alarm:
6. Click on ‘Add action’ under the alarm’s name.
7. Choose the action event type from the drop-down menu options.
8. Press ‘Save’ to confirm settings.
18