User Manual

Web interface - Alarm zones actions
5.4.2. Alarm zones actions
1. Press ‘+ Add action’ under the desired alarm zone. Input fields appear on the right.
2. Choose the action event type from the options in the drop-down menu. ‘Relay action’ and ‘Connect to URL’ are
available. For relay action, go to step 5.
3. If ‘Connect to URL’ is selected, enter the IP address to connect to, such as the VMS server.
4. Depending on the VMS, alarm disable URL may be needed.
5. Press the ‘Save’ button to confirm settings.
6. Repeat for each zone as needed.
7. To edit an action, press ‘Edit’ next to the action in the list.
8. To remove an action, press ‘Remove’ next to the action in the list.
16