User Manual

Web interface - Device configuration
5.3.2. Device configuration
1. Open the ‘Device configuration’ tab.
2. The sensor’s current network and user settings are shown.
3. To change TCP/IP settings, press ‘edit settings’ under the network settings. Input fields will appear to the right.
4. Modify the settings as needed and press the save button when done. If you change the sensor’s IP address, you
will have to reload the page with the new IP address.
5. To change current login settings, press ‘edit settings’ under the login section. Input fields will appear to the right.
6. Enter a new username and password.
7. Press the save button to confirm.
12