Spec Sheet

Detector Accessories
REV:06/19
Copyright © DW. All rights reserved. Specifications and price subject to change without notice.
: 866.446.3595
: [e-mail]
: www.digital-watchdog.com
DW-DTWT - Walk tester for SiteWatch™ motion detectors
An installation tool to help set up SiteWatch™ detectors on site.
• Power 9VDC (PP3 Cell).
• Current standby: 0.5mA.
• Operating: 30mA.
• Operating temperature: -4°F to +131°F (-20°C to +50°C).
DW-DTCAW - White conduit cable entry adaptor for SiteWatch™
motion detectors
For surface mount conduit and cable installations. Complete with integral wall tamper system.
• Suitable for 0.78” (20mm) conduit protected surface run cables.
• Integrated rear tamper mechanism designed to perfectly interface with rear tamper plunger fitted
on all SiteWatch™ detectors.
• Supplied with body locking screws plus wall fixings.
DW-DTPM - Pole mount clamp for SiteWatch™ motion detectors
For mounting SiteWatch™ detectors on poles from 1.57” to 6.69” (40mm to 170mm) in diameter,
maximum two detectors per clamp kit.
• Two coated metal pole clamps c/w threaded bar and locking nuts and washers.
• Supplied with separate tamper-plate and fixing-screws.