Quick Start Guide

Network Attached Storage
®
NAS
4
STEP 2: Turn on the System
1. Connect the power cable of the device to the power source.
2. Press the power button for 3 seconds on the front panel.
- The booting status can be viewed from front LCD.
- Booting is complete and ready to use when LCD displays.
STEP 3: Configure network (for Windows)
RAID GROUP1
RAID5 OK
1. From the Windows based Blackjack
®
server or any Windows PC, open DW IP Finder
™
by double click on the DW IP
Finder
™
icon on the Desktop or click on DW IP Finder
™
from Start Menu > All Programs > DW IP Finder
™
.
* Must be on the same subnet as Spectrum server
2. If the DW IP Finder
™
is not installed or not the latest version, download and install from
http://digital-watchdog.com/support.
- Under Software, select DW IP Finder
™
from the drop down list.
- Then go to Downloads section and expand Software/Firmware.
- Click on the download icon to download the DW IP Finder
™
.
- Then install the DW IP Finder
™
by following the installation wizard.
* Requires DW IP Finder
™
4.3.17 or later version

Quick Start Guide
STEP1:Connectingthenetworkcable
1. LocatethenetworkswitchwheretheSpectrumserverisconnectedto.
(BlackJackNASRACKmustbeonthesamenetworkastheSpectrumserverwhereitwillbe
addedto)
2. Connectthenetworkcabletothenetworkport1andtothenetworkswitch.

STEP2:TurnontheSystem
1. Connectthepowercableofthedevicetothepowersource.

2. Pressthepowerbuttonfor3secondsonthefrontpanel.
-ThebootingstatuscanbeviewedfromfrontLCD.
-BootingiscompleteandreadytousewhenLCDdisplays


STEP3:ConfigureNetwork(forWindows)

1. FromtheWindowsbasedBlackjackserveroranyWindowsPC,openDWIPFinderbydouble
clickontheDWIPFindericonontheDesktoporclickonDWIPFinderfromStartMenu>
AllPrograms>DWIPFinder.
*MustbeonthesamesubnetasSpectrumserver

2. IftheDWIPFinderisnotinstalledornotthelatestversion,downloadandinstallfrom
http://digital-watchdog.com/support.
- UnderSoftware,selectDWIPFinderfromthedropdownlist.
- ThengotoDownloadssectionandexpandSoftware/Firmware.
NOTEItisrequiredtouseGigabitswitch
RAIDGROUP1
RAID5OK

Quick Start Guide
STEP1:Connectingthenetworkcable
1. LocatethenetworkswitchwheretheSpectrumserverisconnectedto.
(BlackJackNASRACKmustbeonthesamenetworkastheSpectrumserverwhereitwillbe
addedto)
2. Connectthenetworkcabletothenetworkport1andtothenetworkswitch.

STEP2:TurnontheSystem
1. Connectthepowercableofthedevicetothepowersource.

2. Pressthepowerbuttonfor3secondsonthefrontpanel.
-ThebootingstatuscanbeviewedfromfrontLCD.
-BootingiscompleteandreadytousewhenLCDdisplays


STEP3:ConfigureNetwork(forWindows)

1. FromtheWindowsbasedBlackjackserveroranyWindowsPC,openDWIPFinderbydouble
clickontheDWIPFindericonontheDesktoporclickonDWIPFinderfromStartMenu>
AllPrograms>DWIPFinder.
*MustbeonthesamesubnetasSpectrumserver

2. IftheDWIPFinderisnotinstalledornotthelatestversion,downloadandinstallfrom
http://digital-watchdog.com/support.
- UnderSoftware,selectDWIPFinderfromthedropdownlist.
- ThengotoDownloadssectionandexpandSoftware/Firmware.
NOTEItisrequiredtouseGigabitswitch
RAIDGROUP1
RAID5OK
Search for Devices
Filter Search Results
Device’s
Network Settings
Select which
Network to Scan
Show/Hide Thumbnail View
Devices Firmware Version
Camera’s Live
Thumbnail View
Device Name,
Model, IP Address,
and MAC Address
Firmware Upgrade