User`s manual

apfiff09 marine vacon • 85
24-
6
7.2.2 Constant Reference
P2.2.7.1 Jogging speed reference ID124
Defines the jogging speed reference when activated by a digital input. This reference will
follow the reverse command if given. Jogging speed has a higher priority than preset
speed references.
Related parameters
- Digital Input P2.4.2.16 Jogging Speed
P2.2.7.2 Preset speed 1 ID105
P2.2.7.3 Preset speed 2 ID106
P2.2.7.4 Preset speed 3 ID126
P2.2.7.5 Preset speed 4 ID127
P2.2.7.6 Preset speed 5 ID128
P2.2.7.7 Preset speed 6 ID129
P2.2.7.8 Preset speed 7 ID130
Parameter values define the Preset speeds references activated by digital inputs. These
references will follow reverse command if given.
Speed
Digital Input
Preset speed 1
Digital Input
Preset speed 2
Digital Input
Preset speed 3
Basic speed
0
0
0
Preset Speed 1
1
0
0
Preset Speed 2
0
1
0
Preset Speed 3
1
1
0
Preset Speed 4
0
0
1
Preset Speed 5
1
0
1
Preset Speed 6
0
1
1
Preset Speed 7
1
1
1
Table 7-1. Preset speeds 1 to 7
Related parameters
Digital inputs P2.4.2.5-7 Preset Speed 1-3
7.2.2.1 Inching function
Inching function will start the drive to reference without additional start command regardless of
control place. Inching function requires enabling from digital input before command is accepted.
Inching is also disabled if there is start command active from active control place.
P2.2.7.9 Inching reference 1 ID1239
P2.2.7.10 Inching reference 2 ID1240
These parameters define the reference for the inching function. The references are bidirectional and
the reverse command does not affect the direction of the inching reference.
Other parameters for inching function
- Digital input selection: Enable Inching
- Digital input selection: Inching 1
- Digital input selection: Inching 2
- Parameter: Inching Ramp