User`s manual

apfiff09 marine vacon • 83
24-
6
P2.2.2 Keypad frequency reference selection ID121
Defines which frequency reference source is used when control place is keypad P3.1
Control Place
- Analogue Input 1.
2.4.3: Input Signals \
- Analogue Input 2.
2.4.4: Input Signals \
- Analogue Input 1 + Analogue Input 2.
With alternative reference scaling in Analogue Input group 100 % input values can be
set to correspond 25 Hz. That is, when both are at 100 % final reference will be 50 Hz.
3= -
Analogue Input 1 - Analogue Input 2.
-
Analogue Input 2 - Analogue Input 1.
Analogue Input 1 x Analogue Input 2
Analogue input 1, -10 Vdc... +10 Vdc
Analogue input 2, -10 Vdc... +10 Vdc
Reference from keypad R3.2
P2.2.3 Fieldbus frequency reference selection ID122
Defines which frequency reference source is selected when control place is Fieldbus
P3.1. Control Place
- Analogue Input 1.
2.4.3: Input Signals \
- Analogue Input 2.
2.4.4: Input Signals \
- Analogue Input 1 + Analogue Input 2.
With alternative reference scaling in Analogue Input group 100 % input values can be
set to correspond 25 Hz thus when both are at 100 % final reference will be 50 Hz.
3= -
Analogue Input 1 - Analogue Input 2.
-
Analogue Input 2 - Analogue Input 1.
Analogue Input 1 x Analogue Input 2
Analogue input 1, -10 Vdc... +10 Vdc
Analogue input 2, -10 Vdc... +10 Vdc
Reference from keypad R3.2