User`s manual

apfiff09 marine vacon • 111
24-
6
P2.4.2.35 Quick Stop ID1213 Quick
Digital input for Quick Stop function
P2.4.2.36 Motoring Torque Limit 1 ID1624
Digital input for activating motoring torque limit 1
P2.4.2.37 Generator Torque Limit 1 ID1626 Gen. Torq. Limit 1
Digital input for activation generator torque limit 1
P2.4.2.38 PIC Function Activation ID1804
Select the digital input that will activate PI controller. Set selection to 0.2 and PI-
controller is activated without external wiring.
P2.4.2.39 Store Parameters ID1753
P2.4.2.40 Start Place A/B ID425
This parameter is used to select if start signal in IO control is monitored from P2.4.2.1
and P2.4.2.2
P2.4.2.41 Start signal 1B ID403 B
Signal selection 1B for the start/stop logic.
This is for Start Place B, selected with P2.4.2.39
Default programming 0.1.Default Forward start, selected with P2.4.1.1.
P2.4.2.42 Start signal 2B ID404 B
Signal selection 2B for the start/stop logic.
This is for Start Place B, selected with P2.4.2.39
Default programming 0.1. Default Reverse start, selected with P2.4.1.1.
P2.4.2.43 RR Enable ID1896 RR Enable
Run Request Enable command.