User`s guide

65
1. Guide
7. System Setup
System Setup
64
1. Guide
7. System Setup
System Setup
[Figure 7-60. Network Setup Screen]
[Network]
The system supports network connection
through LAN using IP address, as well as
DHCP, ADSL, and modem.(Modem set up
not available in Europe)
Select the network option you wish to use by
using mouse or the jog/shuttle.
LAN is the standard network connection for
DW-709/716.
[ID/PASSWORD]
Logging in ADSL require ID/ PASSWORD.
[Site IP]
Enter the system’s IP address for connecting
DW-709/716 to a remote Center via LAN (see
page 65 for details).
[Subnet Mask]
You can enter the system’s subnet mask in
order to communicate with the Center
program when connected through LAN (see
page 66 for details).
[Gateway]
You can enter the system's gateway address
in order to communicate with the Center
using LAN.
[Center IP]
Input the IP address of the Center PC in
order to transfer the recorded data to Center
through LAN (see page 66 for details).
[Center Tel Number]
You can enter the telephone number of the
computer with the Center Program installed
in order to transfer the recording to Center
through modem (see page 67 for details).
(Not in Europe)
[Transfer Time]
Transfer Time determines how long the
system will transfer the recording to the
computer with the Center software installed
when connected via LAN.
You can set the [Transfer Time] in 30
seconds segments up to maximum of 150
seconds by using the mouse wheel or the
jog/shuttle.
[Alarm Sensor]
You can designate any sensors connected to
DW-709/716 into Alarm sensors by
selecting the sensor numbers on [Alarm
Sensor] option.
When an Alarm sensor is triggered, the
system will automatically transfer the
recording data to the remote Center
connected to the system via the network.
In [Network] setup menu, you can set the system’s IP address in order to connect to the Center
Program, as well as setting up Center IP address and telephone number, recording transfer time,
and alarm sensor transfer.
7.6 Network Setup
[Figure 7-61. ID/Password setup]
[Figure 7-62. Site IP Address setup]
[ID/Password setup]
When using ADSL or VDSL network, you
must enter the ID and password of remote
back up server.
Use the mouse or the directional keys and
Enter key to enter the ID and password.
[Site IP address setup]
When using LAN, you must enter the
system’s IP address or domain address.
Use the mouse or the directional keys and
Enter key to enter the IP address.