User`s guide

63
1. Guide
7. System Setup
System Setup
62
1. Guide
7. System Setup
System Setup
7.5.3 Sensor/Control link
[Figure 7-56. Sensor/Control link]
[Figure 7-57. Sensor/Control link setup]
In [Sensor/Control link] menu, you can
link a sensor with controls and set control
time.
[Sensor]
Use the mouse wheel or the jog/shuttle to
select a sensor.
[Control]
You can link a sensor with control
devices. When a sensor is triggered, the
linked control device(s) will automatically
activate.
[Control Time]
You can set how long the control devices
will stay activated. The value can be
changed in 10 seconds segments up to
maximum of 300 seconds.
Use the mouse wheel or the jog/shuttle to
change [Control Time].
7.5.4 Sensor/Camera Link
[Figure 7-58. Sensor/Camera Link]
[Figure 7-59. Sensor/camera link setup(DW-716)]
In [Sensor/Camera Link] menu, you can
link cameras to Sensors.
[Sensor]
Select the sensor you wish to link by
using the mouse wheel or the jog/shuttle.
[Camera]
Select the cameras you wish to link with
the selected sensor by using the mouse or
the directional keys and Enter key.
When the sensor is triggered, its linked
camera(s) will automatically begin
recording.
☞ [Note]
To have the cameras automatically
record when a sensor is triggered, the
schedule for the linked cameras must be
set to “S”, “S:P”, “M:S”, or “M:S:P” (see
page 55 for details on schedule setup).