User`s guide

61
1. Guide
7. System Setup
System Setup
60
1. Guide
7. System Setup
System Setup
7.5.1 Camera name
[Figure 7-52. Camera name option]
[Figure 7-53. Selecting camera name]
Press [Input] button next to [Camera
name] option to give the selected camera
a name.
[Selecting camera name]
Use the mouse or the directional keys and
Enter key to enter the camera name.
You can only enter up to 8 characters.
Press [OK] to accept camera name and
return to Camera setup menu.
7.5.2 Sensor setting
[Figure 7-54. Sensor setting]
[Figure 7-55. Sensor setting]
In [Sensor setting] menu, you can select a
sensor type for any of 4 connected
sensors, and enable or disable alarm
sound.
[Sensor]
Use the mouse wheel or the jog/shuttle to
select a sensor.
[Sensor Type]
Use the mouse wheel or the jog/shuttle to
select “Normally Open” or “Normally
Close” sensor types.
Normally Close type = If the door/object
with the sensor installed is not closed, the
sensor will trigger.
Normally Open type = If the door/object
with the sensor installed is not opened,
the sensor will trigger.
[Beep]
When sensors are triggered, the system
will produce “beep” alarm sound
through its internal speakers. Select “ON”
to enable alarm, and select “OFF” to
disable it.