User`s guide

57
1. Guide
7. System Setup
System Setup
56
1. Guide
7. System Setup
System Setup
[Figure 7-45. Motion Link setting]
[Figure 7-46. Motion Connection Setup Screen(DW-716)]
To access Motion Link setting, use the
mouse or the directional keys to select
[Setting]. The system will display Motion
link setup as shown in Figure 7-46.
[Motion Camera]
Select the camera that will detect the
movement in its motion-detection area by
using the mouse wheel or the jog/shuttle on
the system.
[Link Camera]
Select the cameras that will be linked to the
[Motion Camera] by using the mouse or the
directional keys. You can link multiple
cameras to the [Motion Camera].
7.4.4 Schedule7.4.3 Motion Link Setting
[Figure 7-47. Schedule]
[Figure 7-48. Schedule Setup]
In [Schedule] menu, you can set
automatic schedule for each camera and
their recording mode.
[Camera]
Use the mouse wheel or the jog/shuttle to
select the camera to change its schedule.
[Recording Mode]
You can select a recording mode for the
selected camera by using the mouse or the
direction keys to highlight the time you
wish to set, then use the mouse wheel or
the jog/shuttle to change the recording
mode.
Available recording modes are listed on
the table below. You can also set non-
recording period per camera if you wish
to.
[Apply All]
Click the [Apply All] button to apply the
current camera setting to all cameras.
C : 

M : 
S : 

P : 
Recording Mode Available Recording Modes Schedule Setup Display Channel Display








NONE
C
M
S
M : S
M : P
S : P
M : S : P
None
Red REC
Orange REC

[Motion link setting]
You can set a motion-link recording for each camera.
When the camera detects movement in the motion-detection area, the linked camera will
begin recording as well, regardless of its recording schedule.
To use Motion-link recording, the camera detecting the movement must be set to Motion-
Detection recording in the schedule. If the camera’s schedule is set to Continuous Recording,
Motion Link will be disabled.
In Surveillance mode, when the camera detects movement in its motion-detection area, the
linked camera channel will flash ‘REC’ and begin recording.