User`s guide

47
1. Guide
7. System Setup
System Setup
46
1. Guide
7. System Setup
System Setup
[Figure 7-30. Selecting Video-In Type]
[Figure 7-31. Video In Type]
Select the vido-in type to check the type of
image input and click the [OK] button.
[Video Type]
Select the video input type of the image
source.
[Figure 7-32. Selecting HDD Management]
[Figure 7-33. HDD table]
To renew the HDD installed in the
system, select “HDD Management” and
click the [OK] button.
The table shows the system’s built-in
HDDs and their information. You can
install up to HDD into the system.
From the table, you can select the HDD
you wish to format, then select
[OK]
button. The system will display a
confirmation message shown in Figure 7-
34