User`s guide

37
1. Guide
7. System Setup
System Setup
36
1. Guide
7. System Setup
System Setup
[Figure 7-7. Side Code setup]
[Figure 7-8. Date Type setup]
[Figure 7-9. Date/Time setup]
[Site Code]
You can assign an ID code to the system to
make it recognizable when multiple systems
are connected through network.
The Site Code comprises 6 digits. When
entering Site Code, you can enter a
maximum of 6 digits. Default is "000001"
Use the mouse or the directional keys to type
in the Site Code. Once you select [OK]
button, the new Site Code will apply
immediately.
[Date Type]
You can change the date display format.
Available date format is listed below:
yyyy/mm/dd, yyyy-mm-dd, yyyy.mm.dd
mm/dd/yyyy, mm-dd-yyyy, mm.dd.yyyy
dd/mm/yyyy, dd-mm-yyyy, dd.mm.yyyy
[Time Setup]
You can change the date and time.
Check the time zone of your region, then use
the mouse wheel or the jog/shuttle to set the
[Time Zone].
To change year/month/day and time, use
the mouse or the directional keys on the
system to highlight the option you wish to
change, then use the mouse wheel or the
jog/shuttle to change the option. If Daylight
Saving applies in your region, select the
[Daylight Saving] option.
7.3.3 Software Upgrade
[Figure 7-10. Software Upgrade]
[Figure 7-11. Software Upgrade menu]
In [Software Upgrade] menu, you can
update your system program to new
software versions when they become
available.
[Package Select]
You can upgrade the system program
by using a portable storage device to be
recognized by DW-709/716. The
upgrade package must be in a folder
called "upgrade". Connect the storage
device containing an upgrade package
to the USB port, then press [Select]. The
system will display the number of
packages found.
[Upgraded Version]
After a portable storage device is
connected, you can select the [Upgrade
Version] using the mouse wheel or the
jog/shuttle on the system.
[Current Version]
You can view the current system
program version.
Check to make sure the upgrade
package version is better than the
current version, then select [Start] to
begin the upgrade.
[Caution]
When upgrading is in progress, do not
switch off the system or unplug the
portable storage device containing the
upgrade package until the upgrade is
complete. Otherwise, the system may
malfunction.