User`s guide

35
1. Guide
7. System Setup
System Setup
34
1. Guide
7. System Setup
System Setup
7.3 System Setup
7.3.1 Password
[Figure 7-3. Password Setup]
[Figure 7-4. Password setup]
Select [Password] in system Setup menu to
change password.
To change password, enter the correct [Old
Password], then enter [New Password] and
[Confirm] by entering the new password
again. Then select [OK] button to apply the
new password.
Only 4 digit numerical figure can be input
for password setting.
7.3.2 Site Information
[Figure 7-5. Site Information]
[Figure 7-6. Site Information setup]
In [Site Information], you can change
the [Site Code], [Date Type], and [Time
Setup] options.
[Language]
Select the language you wish to use.
[Site Code]
You can assign an ID code to the
system to make it recognizable when
multiple systems are connected
through network.
[Date Type]
You can change the date display
format.
[Time Setup]
You can change the date and time (see
page 36 for details).
☞ [Note]
This system is equipped with high performance crystal clock and might have 20 ppm of time
difference. Therefore, it might have a little bit of time difference from the international standard
time. Please make sure to check correctness of the time. For detailed time adjustment, refer to
the manual.