User`s guide

1. Guide1. Guide
10
2. Surveillance Mode
Surveillance M ode
2. Surveillance Mode
2.1 Screen Layout
[Figure 2-1. Main Surveillance Mode by 4 split screen]
[Table 2-1. Available Recording Modes and Screen Display]
 
C : Continuous Recording
M : Motion Recording
S : Sensor Recording
P : Pre-alarm Recording
No recording
Continuous Recording
Motion Recording
 Sensor Recording
Motion & Sensor Recording
Motion & Pre-alarm Recording
Sensor & Pre-alarm Recording
Motion & Sensor & Pre-alarm Recording
No Display
Red REC
Orange REC
 [Camera Number]
•Displays camera number.
 [Camera Name]
•Displays camera name.
 [Recording Status]
•Displays camera recording mode enabled.
 [P/T/Z Status]
• Displays Pan/Tilt camera status enabled.
 [Audio Recording Status]
• Shows audio recording enabled.
2
3
4
5
1
2. Surveillance Mode
11
2. Surveillance Mode
Surveillance M ode
[To Select Full Screen mode]
•Press any key 1~16 on the system to enlarge
that camera channel and view in full screen.
[To Select Quad screen]
•Press the 4-split screen button to select quad
display of cameras 1-4. Press again to move to
next quad screen.
[To Select 9 way split screen]
•Press the 9-split screen button to select display
of cameras 1-9. Press again to move to next 9
way screen.
[To Select 16 way split screen]
•Press the 16 way split screen button to view all
cameras on one screen (DW-716).
[Sequence]
•When full screen is selected, press the Auto key
to view all camera channels in sequence. The
system will also sequence between quad and 9
way displays. (see page 41 - OSD/Dwell Time
for details on changing Auto option).
2.2 Enabling full screen and sequence modes
[Figure 2-2. 16-splitscreen mode]
[Figure 2-3. 9-splitscreen mode]
[Figure 2-4. Full screen mode]