User manual

2928
MODULE OSD MENU
*
-D2367WD, D2367WTIR, D2382TIR
EXPOSURE COLOR DAY&NIGHT
BRIGHTNESS
SHUTTER
BLC
AGC
MAX_DR
STARLIGHT
WB MODE
R-Y GAIN
B-Y GAIN
D&N MODE
C_SUP
A_SUP
FUNCTION MOTION PRIVACY
MIRROR
SHARPNESS
GAMMA
FREEZE
NEGATIVE
3D DNR
D-ZOOM
SLC
HME
DIS
MOTION MASK 1
MASK 2
MASK 3
MASK 4
MASK 5
MASK 6
SYNC SETUP EXIT
SYNC CAMERA ID
TITLE
DPC
MONITOR
LANGUAGE
BAUDRATE
OMNI LENS
EXIT
SAVE & EXIT
FACTORY RESET
OSD MENU
*
-D2367WD, D2367WTIR
EXPOSURE
LENS DC (0~100) / MANUAL / VIDEO. (DC Lens is recommended.)
SHUTTER 1/60, 1/100FLC, 1/120 ~ 1/100000
BLC
OFF / ON
Back Light Compensation
AGC
HIGH / MIDDLE / LOW / OFF
Auto Gain Control
MAX-DR OFF /ON (0~ 20) (Electronic Wide Dynamic Range)
STARIGHT
OFF / AUTO (x2 ~ x256)
x32 is recommended.
EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET
COLOR
WB MODE AWC / ATW / MANUAL / PUSH LOCK
R-Y GAIN 0 ~ 100
B-Y GAIN 0 ~ 100
DAY & NIGHT
Day & Night Mode
AUTO/ COLOR/ BW / EX-CONT
COLOR---->BW : Switching fromcolor to BW; if the number is higher, the camera will only switch during a
super low light condition.
BW ---->COLOR : Switching from BW to color; this number should always be lower than COLOR to BW
Read Time: Timeinterval to switch from Color to Black-and-White
COLOR
B&W: (BURST:OFF/ON) Whenthe burst is OFF will make less noise
C-SUP
Color Suppression :
Color will be reduced at low illumination, if the C-SUP Level is higher. 0 ~ 100 (Not Available
when DNR is On.)
A-SUP
ApertureSuppression: The sharpness of the edges will be reduced at low illumination, if A-SUP Level is higher. 0 ~ 100
(Not Available when DNR is On.)
EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET