DWC-D2252DIR, D2262DIR, D2362DIR DWC-D2363D, D2363TIR DWC-D2367WD, D2367WTIR Indoor Dome Camera User Manual ABOUT MANUAL Before installing and using the camera, please read this manual carefully. Be sure to keep it handy for future reference.
PRECAUTIONS Do not open or modify. Do not open the case except during maintenance and installation, for it may be dangerous and can cause damages. ̰GDo not put objects into the unit. ̰GG ̰GG ̰GGGG or other damages. Be careful when handling the unit. ̰ To prevent damages, do not drop the camera or subject it to shock or vibration. ̰GGG ̰ Protect from humidity and dust. Protect from high temperature.
TROUBSHOOTING Before sending your camera for repair, check the following or contact our technical specialist. No Video Check the coaxial cable and make sure it is connected securely. Check the lens’ iris adjustment at the menu setup of the camera. Check the power supply and make sure the camera has the proper voltage and current. Out-of-Focus Video Check the lens manual focal and zoom adjustment. Field test monitor is recommended.
FEATURES*- D2252DIR, D2262DIR ̰ 1/3” Sony Super HAD II CCD ̰ 420 TV Lines 3.6mm Fixed Lens (D2252DIR) ̰ 3.
FEATURES*- D2362DIR 1/3” Sony Super HAD II CCD 540 TV Lines ̰ 3.
BLC (Back Light Compensation) Programmable Privacy Zone (8) & Motion Detection ̰ Easy Icon Driven OSD Menu with Built-in Joystick ̰ Auto Sensing 12VDC/24VAC with Line Lock ̰ Secondary Video-BNC Output ̰ ̰ FEATURES*- D2363TIR ̰ 1/3” Sony Super HAD II CCD ̰ High Resolution 560 TV Lines ̰ 3.
FEATURES*-D2367WD ̰ 1/3” Sony Super HAD II CCD ̰ 560 TV Lines ̰ 3.
FEATURES*-D2367WTIR ̰ 1/3” Sony Super HAD II CCD ̰ 560 TV Lines ̰ 3.
DIMENSION (mm)* 103.1 109.6 41.3 91.0 85.0 6.5 145 5.0 91.0 85.0 117.0 125.0 4.
Power Requirement * Power Wire Maximum Distance Wire Gauge 12VDC 24VAC 24 AWG 80ft 323ft 22 AWG 128ft 513ft 20 AWG 203ft 815ft 18 AWG 323ft 1295ft 16 AWG 514ft 2056ft 14 AWG 816ft 3264ft 12 AWG 1295ft 5183ft 10 AWG 2057ft 8228ft Coaxial Cable Type Maximum Distance RG59/U 750ft RG6/U 1,000feet RG11/U 1,500feet Power Requirement 12VDC at 1A 24VAC at 500mA 10
INSTALLATION* Included with Digital Watchdog Camera: X Z [ ^ 1. 2. 3. 4. 5. 6. User Manual Mounting Template Security L-Key Single Sided Hex Key Secondary BNC Cable for a Field Monitor Four (4) Screws and Four (4) Dry Wall Anchors \ Y ] Camera Installation Use the Mounting Template (2) when mounting the camera. Use the Security L-Key (3) to loosen the Four Screwsthat secure the vandal-proof dome cover. Remove the cover; then, remove the inner screw holes to mount the camera.
INSTALLATION* A. Loosen the Screws (A) with the Security L-Key included with your camera. B. Separate the Upper Case (B) from the Base (F). C. Cut a hole in the ceiling for routing the cables. D. Use the Mounting Template to drill the four screw holes on the surface of the ceiling. E. Pass the Power Cable (C) and the Video Cable (E) from the camera unit through the hole in the ceiling. F. Align the screw holes of the camera unit with the holes in the ceiling. Secure the four screws. G.
CONNECTION* DC12V / AC24V BNC Cable Video Output Main Monitor Spot Monitor Cable Field Test Monitor 13
LENS ADJUSTMENT* B.Focus Lever A. Zoom Lever A. Move the Zoom Lever until you get the desired position. B. Move the Focus Lever until you get the desired focus.
CAMERA SETTING & ON-SCREEN DISPLAY* D2252DIR, D2262DIR, D2362DIR, D2363D, D2363TIR, D2367WD, D2367WTIR Dip Switch for the IR Remote Controller Mini Joystick for the Menu Setup RIGHT UP DOWN LEFT Field Test Monitor Video Output RS485 Connector 15
MODULE OSD MENU* EXPOSURE COLOR BRIGHTNESS SHUTTER BLC AGC FUNCTION DAY&NIGHT WB MODE MOTION MIRROR SHARPNESS GAMMA SLC HME DRC SYNC D&N MODE PRIVACY ALARM SETUP SYNC 16 (D2252DIR, D2262DIR, D2362DIR) MASK 1 MASK 2 MASK 3 MASK 4 COLOR SET EXIT CAMERA ID TITLE EDIT TITLE RESET TITLE POSITION DPC SET LANGUAGE PC CONT.
OSD MENU* (D2252DIR, D2262DIR, D2362DIR) EXPOSURE BRIGHTNESS MANUAL (ELC LEVEL : 0 ~ 100) / DC (DC LEVEL : 0 ~ 31) SHUTTER 1/60, 1/100FLC, 1/120 ~ 1/100000 OFF / ON BLC (Back Light Compensation) OFF / 12dB ~ 36dB AGC (Auto Gain Control) BLC AGC EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET COLOR WB MODE AWC / ATW / MANUAL / PUSHLOCK (AWC is recommended.
FUNCTION MIRROR OFF/ MIRROR SHARPNESS 0 ~ 49 GAMMA USER / 0.45 / 0.6 / 1.
PRIVACY MASK 1 OFF / ON MASK 2 OFF / ON MASK 3 OFF / ON MASK 4 OFF / ON COLOR SET EXIT JUMP BLACK / GRAY / COLOR 1~ 6 EXIT / SAVE&EXIT / FACTORY SET SYNC SYNC MODE INTERNAL / AUTO V-PHASE 0 ~ 199 EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET SETUP CAMERA ID 0 ~ 255 TITLE EDIT TITLE RESET TITLE POS. LANGUAGE OFF / AUTO DPC ( Dead Pixel Cancellation) English / Chinese PC CONT.
MODULE OSD MENU* EXPOSURE COLOR BRIGHTNESS SHUTTER BLC / HME AGC STARLIGHT FUNCTION DAY&NIGHT WB MODE R-Y GAIN B-Y GAIN MOTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE D-ZOOM 3D DNR DRC SYNC D&N MODE C_SUP A_SUP PRIVACY MOTION SETUP SYNC 20 (D2363D, D2363TIR) PRIVACY EXIT TITLE EDIT PC CONTROL LANGUAGE MONITOR OSD COLOR OMNI LENS EXIT SAVE & EXIT FACTORY RESET
OSD MENU* (D2363D, D2363TIR) EXPOSURE BRIGHTNESS 0 ~ 100 SHUTTER 1/60, FLK, 1/120 ~ 1/100000 BLC OFF / ON , BLC (Back Light Compensation) AGC STARLIGHT HIGH / MIDDLE / LOW / OFF AGC (Auto Gain Control) OFF / AUTO (x2 ~ x256) x32 is recommended.
FUNCTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE 3D-DNR D-ZOOM DRC HME DIS EXIT JUMP OFF/MIRROR/V-FLIP/ROTATE 0 ~ 31 0.05 ~ 1.00 / USER OFF / ON OFF/ ON OFF / ON (0 ~ 100) 3D-DNR (3D Digital Noise Reduction) OFF / ON (x1.
PRIVACY EXIT JUMP MASK 1 OFF / ON MASK 2 OFF / ON MASK 3 OFF / ON MASK 4 OFF / ON MASK 5 OFF / ON MASK 6 OFF / ON MASK 7 OFF / ON MASK 8 OFF / ON EXIT / SAVE&EXIT / FACTORY SET SYNC SYNC INTERNAL / AUTO V-PHASE 0 ~ 199 EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET SETUP CAMERA ID 0 ~ 255 TITLE EDIT OFF / ON DPC OFF / ON Dead Pixels Cancellation MONITOR CRT / LCD LANGUAGE English,Japanese, Chinese BAUDRATE 2400 / 4800 / 9600 / 14400 / 19200 / 38400. Protocol is PELCO-D.
MODULE OSD MENU* EXPOSURE COLOR BRIGHTNESS SHUTTER BLC AGC MAX_DR STARLIGHT FUNCTION DAY&NIGHT WB MODE R-Y GAIN B-Y GAIN MOTION MIRROR SHARPNESS GAMMA FREEZE NEGATIVE 3D DNR D-ZOOM SLC HME DIS SYNC D&N MODE C_SUP A_SUP PRIVACY MOTION SETUP SYNC 24 (D2367WD, D2367WTIR) MASK 1 MASK 2 MASK 3 MASK 4 MASK 5 MASK 6 EXIT CAMERA ID TITLE DPC MONITOR LANGUAGE BAUDRATE OMNI LENS EXIT SAVE & EXIT FACTORY RESET
OSD MENU* (D2367WD, D2367WTIR) EXPOSURE LENS DC (0~100) / MANUAL / VIDEO. (DC Lens is recommended.) SHUTTER 1/60, 1/100FLC, 1/120 ~ 1/100000 BLC AGC OFF / ON BLC (Back Light Compensation) HIGH / MIDDLE / LOW / OFF Auto Gain Control MAX-DR OFF /ON (0~ 20) (Electronic Wide Dynamic Range) STARIGHT OFF / AUTO (x2 ~ x256) x32 is recommended.
FUNCTION MIRROR OFF/MIRROR/V-FLIP/ROTATE SHARPNESS 0 ~ 31 GAMMA 0.05 ~ 1.00 / USER FREEZE OFF / ON NEGATIVE OFF/ ON 3D-DNR OFF / LOW / MIDDLE / HIGH 3D Digital Noise Reduction D-ZOOM OFF / ON (x1.
PRIVACY MASK 1 OFF / ON MASK 2 OFF / ON MASK 3 OFF / ON MASK 4 OFF / ON MASK 5 OFF / ON MASK 6 OFF / ON EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET SYNC SYNC INTERNAL / AUTO V-PHASE 0 ~ 199 EXIT JUMP EXIT / SAVE&EXIT / FACTORY SET SETUP CAMERA ID 0 ~ 255 TITLE EDIT OFF / ON DPC OFF / AUTO DPC (Dead Pixels Cancellation) MONITOR CRT / LCD LANGUAGE English,Japanese, Chinese BAUDRATE 2400 / 4800 / 9600 / 14400 / 19200 / 38400. Protocol is PELCO-D.
SPECIFICATIONS* Model Camera TYPE Image Scanning Min. Scene Illumination Functions Lens (D2252DIR) Lens (D2262DIR) Resolution Video Output S/N Ratio OSD Environmental Conditions Power 28 Color/BW D2252DIR / D2262DIR Indoor Dome Camera Mount Device Size Pixels-Total System Horizontal Frequency Internal Mode Vertical Frequency Internal Mode IR-LED ON BLC AGC AWB DRC Motion Detection Privacy Zone Focal Length Focal Length Horizontal VBS 1.
SPECIFICATIONS* Model Camera TYPE Image Scanning Min. Scene Illumination Functions Lens Resolution Video Output S/N Ratio OSD Environmental Conditions Power D2362DIR Color/BW Mount Device Size Pixels-Total System Horizontal Frequency Internal Mode Vertical Frequency Internal Mode IR-LED On BLC AGC AWB DRC Motion Detection Privacy Zone Focal Length Horizontal VBS 1.
SPECIFICATIONS* Model Camera TYPE Image Scanning Min. Scene Illumination Functions Lens Resolution Video Output S/N Ratio OSD Environmental Conditions Power 30 D2363D Color/BW Mount Device Size Pixels-Total System Horizontal Frequency Internal Mode Vertical Frequency Internal Mode F1.2 BLC AGC DRC STAR-LIGHT 3D-DNR Privacy Zone Focal Length Horizontal VBS 1.
SPECIFICATIONS* Model Camera TYPE Image Scanning Min. Scene Illumination Functions Lens Resolution Video Output S/N Ratio OSD Environmental Conditions Power D2363TIR Color/BW Mount Device Size Pixels-Total System Horizontal Frequency Internal Mode Vertical Frequency Internal Mode IR-LED On IR Distance BLC DRC STAR-LIGHT 3D-DNR HME Privacy Zone Focal Length Horizontal VBS 1.
SPECIFICATIONS* Model Camera TYPE Image Scanning Min. Scene Illumination Functions Lens Resolution Video Output S/N Ratio OSD Environmental Conditions Power 32 D2367WD Color/BW Mount Device Size Pixels-Total System Horizontal Frequency Internal Mode Vertical Frequency Internal Mode F1.2 DIS AGC EWDR Mirror STAR-LIGHT Privacy Zone Focal Length Horizontal VBS 1.
SPECIFICATIONS* Model Camera TYPE Image Scanning Min. Scene Illumination Functions Lens Resolution Video Output S/N Ratio OSD Environmental Conditions Power D2367WTIR Color/BW Mount Device Size Pixels-Total System Horizontal Frequency Internal Mode Vertical Frequency Internal Mode IR-LED On IR Distance AGC STAR-LIGHT 3D-DNR HME DIS Privacy Zone Focal Length Horizontal VBS 1.
WARRANTY INFORMATION* Digital Watchdog (referred to as “the Warrantor”) warrants the Camera Series against defects in materials or workmanship as follows. LABOR : For the initial five (5) years from the date of original purchase, if the camera is determined to be defective, the Warrantor will repair or replace the unit, with new or refurbished product at its option, at no charge. PARTS : In addition, the Warrantor will supply replacement parts for the initial five (5) years.
LIMITS AND EXCLUSIONS* There are no express warranties except as listed above. The Warrantor will not be liable for incidental or consequential damages, including without limitation and damage to recording media, resulting from the use of these products or arising out of any breach of the warranty. All express and implied warranties, including the warranties of merchantability and fitness for particular purpose, are limited to the applicable warranty period set forth above.
5436 W Crenshaw St. Tampa, FL 33634 Tel: 866-446-3595 / 813-888-9555 Fax: 813-888-9262 www.Digital-Watchdog.com technicalsupport@dwcc.
