User`s manual

User’s Manual 66
Hardware & Options Operation
SIM card slot
Some models are equipped with a SIM card slot that allows you to
assemble a SIM card from your wireless service provider to use your
provider’s mobile networks for transmitting data.
Inserting a SIM card
To insert a SIM card, follow the steps as detailed below:
1. Turn off your tablet. Remove the cover and the battery pack as
described in the Removing the battery pack section.
2. Locate the SIM card slot beside the battery pack slot.
3. Slide your SIM card into the SIM card slot with your finger as shown on
the figure below.
(Sample Illustration) Inserting a SIM card
4. Install the battery pack and the cover in place.
Now you can power on your tablet to use your provider’s mobile networks.
Removing a SIM card
To remove a SIM card, follow the steps as detailed below:
1. Turn off your tablet. Remove the cover and the battery pack.
2. Locate the SIM card slot beside the battery pack slot.
3. Grasp the SIM card and pull it out of the SIM card slot.
4. Install the battery pack and the cover in place.
■ Do not remove the memory media while the tablet is in Suspend mode.
The tablet could become unstable or data in the memory media could
be lost.
■ Do not remove only the miniSD/microSD Card while leaving the
adaptor in the memory media slot.
This section only applies to models with 3G modules.