User`s manual

User’s Manual 13
Getting Started & Grand Tour
Shut Down the Tablet
When you shut down the tablet, no data will be saved. The tablet will boot
to the main screen when the next time it is turned on.
1. If you have entered data, either save it to flash memory or to other
storage media.
■ Press the Power button for 2 seconds and select OK to turn off the
tablet.
2. Turn off any peripheral devices connected to the TOSHIBA AT100
tablet.
Turning the LCD off/on
You can turn the LCD off (while the system is still on) in one of the following
ways:
■ Press the power button.
■ Set the screen timeout in the Settings.
To turn the LCD on:
■ Press the power button again.
■ Never turn off the power while an application is running. Doing so could
cause loss of data.
■ Never turn off the power, disconnect an external storage device or
remove storage media during data read/write. Doing so can cause data
loss.
■ In any emergency case, you can also press the power button for about
six seconds to force power off.
Do not turn the tablet or peripheral devices back on immediately - wait a
short period to avoid any potential damage.