User’s Manual TOSHIBA AT100
TOSHIBA AT100 Introduction Welcome and thank you for choosing a TOSHIBA product. For your convenience, your TOSHIBA product is furnished with two guides: ■ a Quick Start Guide, and ■ this comprehensive PDF User’s Manual. We recommend to backup the User's Manual onto an external device. Please backup your data that is saved in internal storage before updating the platform.
TOSHIBA AT100 Table of Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Check the components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Getting Started & Grand Tour Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Grand Tour . . . . . . . .
TOSHIBA AT100 Gallery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 TOSHIBA Media Player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Picture frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Service Station . . . . . . . . . . . . . . . . . . . . . . . .
TOSHIBA AT100 Indication of restrictions of use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Working environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Additional environments not related to EMC. . . . . . . . . . . . . . . . . . . . 85 REACH - Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Following information is only valid for EU-member States:. . . . . . . . 85 Canadian regulatory information (Canada only) .
TOSHIBA AT100 Check the components Check to make sure you have all of the following items: Hardware ■ ■ ■ ■ TOSHIBA AT100 Tablet AC adaptor and power cord (2-pin plug or 3-pin plug) Battery pack (installed in the tablet) Sleeve case (provided with some models) Documents ■ TOSHIBA AT100 Quick Start Guide ■ Instruction Manual for Safety and Comfort If any of the items is missing or damaged, contact your dealer immediately.
TOSHIBA AT100 ■ If dust gets on the power plug connectors or connector base, turn the power off and disconnect the power plug. Then clean the connector and/or connector base with a dry cloth. Continuing to use the product without cleaning the power plug may result in a fire or an electric shock, possibly resulting in serious injury. ■ Always use the TOSHIBA AC adaptor that was provided with your product, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the product.
TOSHIBA AT100 ■ Never subject your product to sudden temperature variations. This may result in condensation, causing a system failure, malfunction or loss of data. ■ Never operate your product on AC power during a thunderstorm. If you see lightning or hear thunder, immediately turn off the product. An electric surge caused by the storm, may result in a system failure, loss of data or hardware damage.
Getting Started & Grand Tour This chapter provides an equipment checklist, grand tour of your tablet and basic information to start using your tablet. Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Getting Started ■ All users should be sure to read the section Initial Setup. This section provides basic information to start using your tablet.
Getting Started & Grand Tour (Sample Illustration) The AC adaptor (2-pin plug) (Sample Illustration) The AC adaptor (3-pin plug) ■ Depending on the model, either a 2-pin or 3-pin adaptor/power lead will be bundled with the tablet. ■ Do not use a 3-pin to 2-pin conversion plug. ■ The supplied power cord conforms to safety rules and regulations in the region the tablet is bought and should not be used outside of this region.
Getting Started & Grand Tour ■ Always use the TOSHIBA AC adaptor that was included with your tablet, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the tablet. Use of an incompatible AC adaptor could cause fire or damage to the tablet possibly resulting in serious injury. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor.
Getting Started & Grand Tour Press the power button on the tablet to turn on the power. 3 PIN 2 PIN (Sample Illustration) Turning on the tablet Initial Setup The Setup Screen will be the first screen displayed when you turn on the power. Setup your tablet according to the following steps: 1. Choose the language as you want and then tap Start to continue. 2. Connect to a wireless network via Wi-Fi. You may also skip this section and turn Wi-Fi on later in Settings screen. 3.
Getting Started & Grand Tour Shut Down the Tablet When you shut down the tablet, no data will be saved. The tablet will boot to the main screen when the next time it is turned on. 1. If you have entered data, either save it to flash memory or to other storage media. ■ Press the Power button for 2 seconds and select OK to turn off the tablet. ■ Never turn off the power while an application is running. Doing so could cause loss of data.
Getting Started & Grand Tour Unlocking your screen After turning on the LCD, the screen remains locked. You can unlock the screen in the following ways: 1. Press and hold the unlock icon ( ). 2. Slide the icon towards the appearing circle. If you have set up a screen lock through one of the three ways as pattern, PIN or password, the method of unlocking the screen will be different. See Location & security section for other ways to protect your tablet and privacy.
Getting Started & Grand Tour Grand Tour Please handle your product carefully to avoid scratching or damaging the surface. The following figure shows the grand tour of your tablet. 1 2 3 5 6 7 4 8 10 11 12 9 21 20 13 19 18 17 16 15 1. Web Camera LED 2. Microphone 3. Web Camera (front) 4. Wireless LAN, 3G* and Bluetooth antennas (not shown) 5. Battery cover lock 6. Power indicator 7. Battery indicator 8. Wi-Fi/3G/Bluetooth indicator 9. Display screen 10. Power button 11.
Getting Started & Grand Tour User’s Manual Web Camera LED The Web Camera LED will glow blue when the Web Camera is in operation. Microphone A built-in microphone allows you to import and record sounds for your application. Web Camera Your tablet is equipped with a front Web Camera and a back Web Camera used for recording video or taking photographs with your tablet. Wireless LAN antennas Some models are equipped with Wireless LAN antennas.
Getting Started & Grand Tour Orientation lock switch Switch to lock/unlock automatic rotation of the screen orientation. Memory media slot This slot lets you insert an SD™/SDHC™/SDXC™ memory card, a miniSD™/microSD™ Card and a MultiMediaCard. Please refer to the Memory media slot section in "Hardware & Options Operation" chapter for details. Keep foreign metal objects, such as screws, staples and paper clips, out of the memory media slot.
Getting Started & Grand Tour Headphone/ Microphone combo jack A 3.5 mm mini headphone/microphone combo jack enables connection of a monaural microphone or a stereo headphone. Both the internal and external microphones will be disabled if you use a headset other than a 4-pin headset headphone. User’s Manual DC IN 19V jack The AC adaptor connects to this jack in order to power the tablet and charge its internal batteries.
Getting Started & Grand Tour Power conditions The tablet's operating capability and battery charge status are affected by different power conditions, including whether an AC adaptor is connected, whether a battery pack is installed and what the charge level is for that battery. The LED in the table below refers to the Battery indicator.
Basic Operations & Home screen This chapter describes the basic operations of your tablet and the Home screen. Using the Touch Screen You can use your finger to manipulate icons, buttons, menu items, the onscreen keyboard, and other items on the touch screen. ■ Tap Simply tap your finger on the touch screen to act on items on the screen, such as application and settings icons, to type letters and symbols using the onscreen keyboard, or to tap onscreen buttons.
Basic Operations & Home screen Getting to know the HOME screen The HOME screen is your starting point for using all the installed applications on your tablet. You can customize the HOME screen to display the widgets, application shortcuts, wallpapers and other shortcuts you prefer. 1 2 3 4 5 6 7 1. Apps menu 2. Customize 3. Widgets 4. Application shortcuts 8 5. Back 6. Home 7. Recent apps 8.
Basic Operations & Home screen Item Description System bar Apps menu Show app notifications, tablet status and quick settings. See all your tablet’s apps. ■ Slide to see more Home screen panels. ■ Use panels to organize your widgets and shortcuts. See Customizing the Home screen section for the details. ■ To return to the center panel, tap Home button. Apps menu Tap the ( ) icon at the upper right corner of Home screen to open Apps menu. You can find all your apps in this place.
Basic Operations & Home screen Status icons The icons on the right of the status bar indicate the status of your tablet. Notification icons The icons on the left of the status bar indicate different types of notifications. In addition to system notification icons, applications you installed on your tablet may use their own notification icons. Quick Settings You can use Quick Settings to change settings, such as Airplane mode, Wi-Fi, Auto-rotate screen, Brightness, Notifications.
Basic Operations & Home screen Opening the Notifications panel Tap the status bar to open the notifications panel. The notifications panel displays a list of your current notifications. Notifications about ongoing activities are listed first, followed by notifications about events, such as a new mail notifications. Responding to a notification To respond to a notification, follow the below steps: 1. Open the notifications panel.
Basic Operations & Home screen Adding an item to the Home screen To add an item to the Home screen, follow the steps listed below: 1. Tap the ( ) icon at the upper right corner of the home screen. 2. Tap on tab of Widgets, Application shortcuts, Wallpapers or More. 3. Drag the Widgets, shortcuts, or other items to the Home screen panel you want. ■ You can also tap Widgets, shortcuts to add them to current Home screen panel. ■ The number of Widgets you can add depends on the size of Widgets.
Basic Operations & Home screen Changing the Screen Orientation You can change the screen orientation to Portrait mode by rotating the tablet sideways. The screen orientation automatically changes according to the rotation angle detected. You can also lock the auto rotation and use the tablet always in Portrait or Landscape mode. These settings can be performed in the Screen settings. Please refer to Screen section for details.
Connecting to networks Your tablet can connect to a variety of networks and devices, mobile networks for voice and data transmission, Wi-Fi data networks and Bluetooth devices, such as headsets. This chapter will describe how to connect to different networks. Connecting to mobile networks This section only applies to models with 3G modules.
Connecting to networks Connecting to Wi-Fi networks Wi-Fi is a wireless networking technology that can provide Internet access at distances of up to 100 meters, depending on the Wi-Fi router and your surroundings. To use Wi-Fi on your tablet, you need to access a wireless access point, or “hotspot”. Some access points are open and you can simply connect to them. Others are hidden or implement other security features, so you must configure your tablet so it can connect to them.
Connecting to networks Adding a Wi-Fi network You can add a Wi-Fi network so the tablet will remember it, along with any security credentials, and connect to it automatically when it is in range. You must also add a Wi-Fi network to connect to it, if it does not broadcast its name (SSID), or to add a Wi-Fi network when you are out of range.
Connecting to networks Turning Bluetooth on or off 1. Open the Settings screen. 2. Tap Wireless & networks. 3. Check or uncheck Bluetooth to turn it on or off. Changing your tablet’s Bluetooth name Your tablet has a generic Bluetooth name by default, which is visible to other devices when your connect them. You can change the name so that it is more recognizable. 1. Open the Settings screen. 2. Tap Wireless & networks → Bluetooth settings. The Bluetooth settings screen will be displayed. 3.
Connecting to networks 3. In the list of Bluetooth devices, tap a paired but unconnected device. If the device you expected isn’t displayed, tap Scan for devices. When your tablet and this device are connected, this device is shown as connected in the list. Disconnecting from a Bluetooth device 1. Tap the device in the Bluetooth settings screen. 2. Tap OK to confirm that you want to disconnect.
Applications & Widgets This chapter describes the applications & widgets and how to use them. Your tablet has some Google Mobile™ services installed depending on the model you purchased. Analog clock Analog clock is a widget to display a clock in the Home screen based on the system time so that you can watch time directly from the clock. You can also use it to set an alarm clock. For details, please refer to the Clock section.
Applications & Widgets ■ The Browser cannot display some web pages correctly if the web page has a complicated layout. This is dependent on the web page. ■ The Browser does not support file uploading function. ■ The Browser might connect to a “mobile” website rather than a “PC” website, depending on the site. If you want to access the PC website, please manually select the correct site. Zoom in or zoom out on a webpage You can zoom on a webpage in either of the following ways.
Applications & Widgets View your Browser history As you browse the web, Browser will keep track of the pages you visit, to help you find your way back later. 1. Tap the bookmark icon ( ) at the upper right corner of the screen. 2. Tap the History tab. The pages you’ve visited are grouped chronologically. Bookmarked pages have a star. 3. Tap a time period to view the pages you’ve visited. 4. Tap a page in the history to reopen it.
Applications & Widgets Add events to Calendar You can add events to Calendar by following these steps: 1. Tap any blank period on your calendar or the New Events icon ( on the top right corner of Calendar screen. 2. Enter Event name and set details for this date. You can add guests by entering their email addresses. 3. Tap Done to save. ) Camera Camera is a combination of camera and camcorder that you can use to shoot and share pictures and videos. Pictures and videos are stored in the Gallery.
Applications & Widgets Review your pictures/videos You can review the pictures/videos you’ve taken in Camera. ■ Tap the thumbnail image on the bottom left of the Camera screen to open the Gallery. For details, refer to the Gallery section. Photo options Many options are displayed on the screen. ■ White balance( ■ Color effect( ■ Scene mode( ): Adjust for lighting conditions. ): Pick a cool effect. ): Choose your environment.
Applications & Widgets Setting an alarm 1. Tap the Alarm icon ( ) below the time display. 2. Tap an existing alarm clock to change its time and other attributes. Or tap Add alarm to add a new one. 3. Tap Time to set the time of the alarm. 4. Tap Repeat to set the days when you want the alarm to sound. If you don’t set a repeat, the alarm sounds only one time. 5. Tap Ringtone to select a ringtone for the alarm. The ringtone plays when you select it. 6. Tap Vibrate to enable vibration when the alarm sounds.
Applications & Widgets 4. Tap a matching contact in the list to open its details screen. Display options You can sort contacts list by First name or Last name. 1. Open your Contacts. 2. Tap Menu icon ( ) and then tap Settings. 3. Set Sort list by and View contact names as. Edit or delete contacts ■ To edit a contact, tap the contact, and then tap ( ). ■ To delete a contact, tap the contact, and then tap Menu → Delete contact.
Applications & Widgets To send an email: 1. Tap ( ) and enter the recipient, subject and message. 2. Tap ( ) to add attachments. When you enter text in the To: field, your tablet shows possible matches from your Contacts list, if any exist. Respond to an email You can reply to or forward an email that you’ve received. You can also delete emails and manage them in other ways. While reading an email, tap Menu ( Forward or Delete.
Applications & Widgets View and browse pictures/videos All the albums are displayed in the screen. 1. Tap an album to open it and view its contents. The pictures and videos in the album are displayed in chronological order. You can view the pictures and videos in your albums in stacks, sorted By album, time, location, tags and size. 2. Tap Images and videos tab, you can choose to view Images only, Videos only, or both. 3. Tap a picture or video in an album to view it.
Applications & Widgets TOSHIBA does not guarantee that all the audio/video files with the above code will be played correctly. The main screen of this player contains two parts: one is the Mode Icons, the other is the Main Menu area. This player contains the following modes: Audio, Video, Photo, Podcast and DMP. You can switch mode by selecting the mode icon. The content of the Main Menu area will be changed automatically with current mode.
Applications & Widgets Work with playlists You can create playlists to organize your music files into sets of songs, which you can play in the order you set or in a shuffle. To create a playlist: 1. Tap sort tab on the Music library screen and choose Playlists tab. 2. Tap plus icon to add a new playlist. 3. Enter a name and tap OK to save. The new playlist is added to the Playlist library.
Applications & Widgets Main Window The main window of this application includes three areas: Header, Buttons, and Information. ■ Header This section runs along the top of the screen, and contains basic information about your system such as the version of the operating system, the tablet part number and serial number. ■ Buttons Buttons are displayed on the screen. These buttons will change, depending on what actions you have available on the current screen.
Applications & Widgets Tap the Install button. This will launch the application installer. Continue with installation. Downloading and Installing System Updates Service Station will download both application and system updates. System updates require that your tablet is rebooted during the update. Downloading a system update is the same as an application update.
Applications & Widgets ■ File Folders and files are listed in multi-columns with thumbnails which show the file information such as Name, Modified date time, etc. The selected files or folders would be tagged as red. ■ Control You can select files, create folders and go up to the upper level directory by selecting different options. Files & Folders Operation After you tap Select File, a file selecting window will be opened which enables you to multi-select, copy, cut and delete selected files or folders.
Applications & Widgets Storage Structure The following table describes the meaning of the device icons in TOSHIBA File Manager. Icon Name Description Internal Storage It shows all the contents in the tablet’s flash memory except the system files and files in SD card and USB storage. SD card It shows all the contents in the SD card. USB storage It shows a menu of connected USB devices (a maximum of 8 USB devices/disk partitions are supported).
Settings This chapter will describe different setting options in the Settings application. You can use Settings to configure how your tablet sounds, communicates and operates in many other ways. A scrollbar is displayed in right side of the screen. This scrollbar is only used to show the position of the displayed area. You can scroll the settings items using your fingers or USB mouse.
Settings Sound You can use Sound settings to configure many aspects of notification ringtones, music and other audio. Sound settings contains the following options: ■ Volume Tap to open a dialog where you can drag a slider to set the volume for media, notification and alarm. ■ Notification ringtone Tap to open a dialog where you can set the default notification tone when you receive a notification. ■ Audible selection Check this option to play sound when making screen touch.
Settings ■ Audio enhancement Tap to setup and enable audio enhancer function with SRS and Toshiba Technologies. SRS Premium Voice PRO information SRS Premium Voice PRO™ provides a superior voice communication and multimedia experience for the PC. Location & security You can use Location & security settings to configure settings that help secure your tablet and its data.
Settings ■ Device administrators Tap to open a screen where you can add or remove device administrators. ■ Use secure credentials Check this option to allow applications to access your tablet’s encrypted store of secure certificates and related passwords and other credentials. You can use credential storage to establish some kinds of Wi-Fi connections. If you have not set a password for credential storage, this setting is dimmed. ■ Install from storage Tap to install a secure certificate from the storage.
Settings ■ This tablet does not support another Operating System. ■ TOSHIBA cannot guarantee or support applications that are installed by a user. Accounts & sync You can manage your mail or exchange accounts by using Accounts & sync settings. ■ Add account Tap Add account tab on the top right corner to add a mail account or an exchange account. You can sync your contacts, calendar or other applications data via an exchange account.
Settings External storage External storage may contain the following options depending on the devices that you inserted: ■ If only an SD card is inserted ■ Unmount SD card Tap to unmount the SD card for safe removal. ■ If a USB memory device and an SD card are inserted ■ Unmount SD card Tap to unmount the SD card for safe removal. ■ Unmount USB0 - Unmount USB7 Tap to unmount the USB memory device for safe removal.
Settings ■ Voice output ■ Text-to-speech settings Tap to open a dialog where you can set the voice data required for text-to-speech function. ■ Keyboard settings ■ Current input method Tap to open a dialog where you can select the input method you want to use, if you have more than one installed, or touch Configure input methods to open the screen where you can configure the current input method.
Settings ■ Select time zone If Automatic time zone is unchecked, tapping it will open a dialog where you can set the time zone for tablet. ■ Use 24-hour format Check this option to display the time using 24-hour time format - for example, 13:00 rather than 1:00 pm. ■ Select date format Tap to open a dialog where you can select the format for displaying dates. About tablet About tablet includes information about your tablet. ■ System updates Tap to open the screen to check your system for update.
Hardware & Options Operation This chapter identifies the various components and the hardware of the tablet - it is recommended that you become familiar with each before you operate the tablet. ■ Please handle your tablet carefully to avoid scratching or damaging the surface. ■ This tablet does not support CD/DVD/Blu-ray Disc™. ■ This tablet cannot be used as a mobile phone. ■ Content that is copyright protected or has limited access rights, cannot be played on this tablet.
Hardware & Options Operation Power Battery pack The tablet is powered by one replaceable lithiumion battery pack. AC adaptor The AC adaptor provides power to the system and recharges the batteries when they are low. It comes with a detachable power cord which will either have a 2-pin or 3-pin plug enclosure. As the AC adaptor is universal, it can receive a range of AC voltages from 100 to 240 volts, however you should note that the output current varies among different models.
Hardware & Options Operation 3G Some models are equipped with a 3G module. FCC compliance and Industry Canada (IC) compliance does not apply to this product with a 3G module installed. CAUTION Bluetooth™ and Wireless LAN devices operate within the same radio frequency range and may interfere with one another. If you use Bluetooth™ and Wireless LAN devices simultaneously, you may occasionally experience a less than optimal network performance or even lose your network connection.
Hardware & Options Operation ■ The lithium ion battery pack can explode if not replaced, used, handled or disposed of properly. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ The tablet’s RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed.
Hardware & Options Operation In such cases you should follow the steps as detailed below: 1. Fully discharge the battery by leaving it in the tablet with the power on until the system automatically turns itself off. 2. Connect the AC adaptor to the DC IN 19V jack of the tablet, and to a wall outlet that is supplying power. 3. Charge the battery until the Battery indicator glows white. Repeat these steps two or three times until the battery recovers normal capacity.
Hardware & Options Operation Removing the battery pack To remove a discharged battery, follow the steps as detailed below: 1. Save your work. 2. Turn the tablet's power off. 3. Remove all cables and peripherals that are connected to the tablet. Remove the memory cards from the memory card slot. 4. Turn the tablet upside down. 5. Slide the cover lock into its unlock ( ) position. 6. Slide your finger under the cover recess nearby the cover lock and lift this corner up first. 1 1.
Hardware & Options Operation 8. Slide the battery lock into its unlocked ( ) position. 9. Slide and hold the battery release latch to disengage the battery pack and then lift it up to remove it from the tablet. 1 2 1. Battery lock 2. Battery release latch (Sample Illustration) Removing the battery pack Installing the battery pack To install a battery pack, follow the steps as detailed below: 1.
Hardware & Options Operation Mini USB port This tablet is equipped with a mini USB port that enables you to connect to a computer. To connect to a computer: 1. Plug the Mini USB connector of a USB cable into the Mini USB port on this tablet. 2. Plug the other end of the USB cable into the USB port on the computer. Then this tablet becomes a removable MTP (Media Transfer Protocol) device and you can access its content from the computer. To remove this tablet from the computer: 1.
Hardware & Options Operation ■ This memory media slot supports the following memory media. ■ Secure Digital (SD) Card (SD memory card, SDHC memory card, SDXC memory card, miniSD Card, microSD Card) ■ MultiMediaCard ■ Please note that an adaptor is required to use miniSD/microSD Card. ■ Please note that not all memory media have been tested and verified to work correctly. Therefore, it is not possible to guarantee that all memory media will operate properly.
Hardware & Options Operation Memory media format New media cards are formatted according to specific standards. If you wish to reformat a media card, be sure to do so with a device that uses media cards. Formatting an SD/SDHC/SDXC memory card SD/SDHC/SDXC memory cards are sold already formatted in conformity to specific standards.
Hardware & Options Operation Set the write-protect switch to the lock position, if you do not want to record data. Inserting a memory media The following instructions apply to all types of supported media devices. To insert a memory media, follow the steps as detailed below: 1. Turn the memory media so that the contacts (metal areas) are facing down. 2. Insert the memory media into the memory media slot on the tablet. 3. Push the memory media gently to ensure a firm connection is made. 1 2 1.
Hardware & Options Operation ■ Do not remove the memory media while the tablet is in Suspend mode. The tablet could become unstable or data in the memory media could be lost. ■ Do not remove only the miniSD/microSD Card while leaving the adaptor in the memory media slot. SIM card slot Some models are equipped with a SIM card slot that allows you to assemble a SIM card from your wireless service provider to use your provider’s mobile networks for transmitting data.
Hardware & Options Operation Make sure the battery pack is removed before you insert or remove a SIM card. Otherwise, the SIM card might be damaged. USB device This tablet is equipped with a USB port that can accommodate the following USB devices: USB flash memory, External USB HDD, HID (Keyboard and Mouse) and USB hub. This port complies with USB 2.0 standard. To connect a USB device, plug the device’s connector into the USB port on your tablet.
Hardware & Options Operation To connect external devices, follow the steps as detailed below: As the port operation of all HDMI (High-Definition Multimedia Interface) monitors has not been confirmed, some HDMI monitors may not function properly. 1. 2. Plug one end of the HDMI cable into the HDMI port of the HDMI device. Plug the other end of the HDMI cable into the HDMI port on your tablet. 1 2 1. HDMI port 2.
Hardware & Options Operation Using the TOSHIBA Tablet Dock Connecting the AC adaptor 1. Connect the power cord to the AC adaptor. (Sample Illustration) Connecting the power cord to the AC adaptor (2-pin plug) (Sample Illustration) Connecting the power cord to the AC adaptor (3-pin plug) Either a 2-pin or 3-pin adaptor/cord will be included with the tablet depending on the model. 2. Connect the AC Adaptor (provided with your TOSHIBA tablet or purchasing separately) to the Dock. 3.
Hardware & Options Operation 3. Connect the docking interface on your tablet with the docking connector on the dock. (Sample Illustration) Connecting your tablet with the dock A notice of connecting will appear on the status bar of your tablet. To disconnect your tablet, remove your tablet following the connector’s direction. The Grand Tour of the dock The following figures show the ports on the dock. TOSHIBA Tablet USB Cradle 1 2 1. Docking mark 2.
Hardware & Options Operation 1 1.DC IN 19V jack 3. Universal Serial Bus 2.0 ports 2 3 4 2.Headphone jack 4. HDMI port (Sample Illustration) Back of the dock TOSHIBA Tablet Cradle 1 2 1. Docking mark 2.
Hardware & Options Operation 1 1. DC IN 19V jack 2 2. Headphone jack (Sample Illustration) Back of the dock User’s Manual Docking mark This mark is used for aligning your tablet with the dock. Docking connector TOSHIBA Tablet connects the dock via docking connector. Universal Serial Bus 2.0 ports Universal Serial Bus ports, which comply to the USB 2.0 standard, are provided. DC IN 19V jack The AC adaptor connects to this jack in order to power the tablet and charge its internal batteries.
Hardware & Options Operation Optional accessories You can add a number of options and accessories in order to make your tablet even more powerful and convenient to use.
Troubleshooting TOSHIBA have designed this tablet for durability, however, should problems occur you are able to use the procedures detailed in this chapter to help determine the cause. All users should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place.
Troubleshooting ■ Inspect all connecting cables for loose wires and all connectors for loose pins. Always try to make detailed notes of your observations and keep them in a permanent error log - this will help you to describe your problems to your reseller, dealer or service provider. In addition, if a problem recurs, the log you have made will help to identify the problem faster. Hardware and system checklist This section discusses problems caused by your tablet’s hardware or attached peripherals.
Troubleshooting Problem Procedure You cannot write to a Memory Card Remove the Memory Card from the tablet and check to ensure that it is not write protected. You cannot read a file Check to ensure the required file is actually on the Memory Card that is inserted into the tablet. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.
Troubleshooting Problem Procedure Display error occurs Check that the cable connecting the external monitor to the tablet is firmly attached. If you are still unable to resolve the problem, contact your reseller, dealer or service provider. Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. Problem Procedure Cannot access Wireless LAN Make sure the tablet's Wireless communication functionality is set to on.
Troubleshooting TOSHIBA technical support If you are still unable to solve the problem and suspect that it is hardware related, visit TOSHIBA technical support website http://www.toshiba.co.jp/worldwide/.
Specifications This appendix summarizes the tablet’s technical specifications. Physical Dimensions Size 273 (w) x 177 (h) x 15.8 (d) millimeters (not including parts that extend beyond the main body).
Regulatory information Copyright © 2011 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. TOSHIBA AT100 User’s Manual Second edition September 2011 Disclaimer This manual has been validated and reviewed for accuracy.
Regulatory information Notwithstanding the above, portions of the software include software files subject to certain open source license agreements, and such open source software files are subject to the notices and additional terms and conditions that are referenced in the End User License Agreement (“EULA”) shown in “Toshiba Legal Information” section of the “Legal information” available under the ”About tablet” tab on the “Settings” menu.
Regulatory information H.264/AVC, VC-1 and MPEG-4 License Notice THIS PRODUCT IS LICENSED UNDER THE AVC, THE VC-1 AND MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (i)ENCODING VIDEO IN COMPLIANCE WITH THE ABOVE STANDARDS ("VIDEO") AND/OR (ii)DECODING AVC, VC-1 AND MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE SUCH VIDEO.
Regulatory information FCC conditions This tablet complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This tablet may not cause harmful interference. 2. This tablet must accept any interference received, including interference that may cause undesired operation. Contact Address: Telephone: TOSHIBA America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618-1697 (949) 583-3000 Caution: Exposure to Radio Frequency Radiation.
Regulatory information Indication of restrictions of use France: Outdoor use limited to 10mW e.i.r.p. within the band 24542483.5MHz Military Radiolocation use.Refarming of the 2.4GHz band has been ongoing in recent years to allow current relaxed regulation Full implementation planned 2012 Italy: - For private use, a general authorization is required if WAS/RLAN’s are used outside own premises.
Regulatory information Additional environments not related to EMC Outdoor use: As a typical home/office equipment this product has no special resistance against ingress of moisture and is not strong shock proofed. Explosive atmosphere: The use of this product in such special working environment (Ex) is not allowed. REACH - Compliance Statement The new European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007.
Regulatory information Disposal of batteries and/or accumulators The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste.
Information for Wireless Devices Wireless LAN Interoperability The Wireless LAN is compatible with other LAN systems Direct Sequence Spread Spectrum (DSSS) /Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to: ■ The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/n, b/g/n), as defined and approved by the Institute of Electrical and Electronics Engineers. ■ The Wireless Fidelity (Wi-Fi®) certification as defined by the Wi-Fi Alliance®.
Information for Wireless Devices CAUTION about Wireless Devices The wireless devices have not completed verification of connection and operation with all devices which are using the Wireless LAN or Bluetooth radio technology. Bluetooth and Wireless LAN devices operate within the same radio frequency range and may interfere with one another.
Information for Wireless Devices Radio Regulatory Information The Wireless device is must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This product complies with the following radio frequency and safety standards. Europe Restrictions for Use of 2400.0-2483.5MHz Frequencies in Europe User’s Manual France: Outdoor use limited to 10mW e.i.r.p. within the band 24542483.5MHz Military Radiolocation use.
Information for Wireless Devices Restrictions for Use of 5150-5350MHz Frequencies in Europe Italy: - For private use, a general authorization is required if WAS/ RLAN’s are used outside own premises. Luxembourg: Implemented General authorization required for network and service supply Russian Federation: Limited e.i.r.p 100mW. Permitted to use only for indoor applications, closed industrial and warehouse areas, and on board aircraft. 1.
Information for Wireless Devices the allowable frequencies for outdoor use, as listed above, the user must contact the applicable national spectrum regulator to request a license for outdoor operation. Canada - Industry Canada (IC) This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
Information for Wireless Devices Caution: Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 to 5.25GHz frequency range. Taiwan Article 12 Without permission granted by the DGT or NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices.
Information for Wireless Devices 2. Indication for Wireless LAN The indication shown below appears on this equipment. (1) 2.4 : This equipment uses a frequency of 2.4 GHz. (2) DS : This equipment uses DS-SS modulation. (3) OF : This equipment uses OFDM modulation. (4) 4 : The interference range of this equipment is less than 40 m. (5) : This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3.
Information for Wireless Devices Device Authorization This device obtains the Technical Regulation Conformity Certification and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Telecommunications Business Law of Japan. ■ Broadcom® Wireless Wi-Fi® AW-NH931 Series The Name of the radio equipment: AW-NH931 DSP Research, Inc. Approval Number: D110465003 The following restrictions apply: ■ Do not disassemble or modify the device.
Information for Wireless Devices User’s Manual Luxembourg Malaysia Malta Monaco Morocco Netherlands New Zealand Norway Oman Panama Peru Philippines Poland Portugal Romania Russia Saudi Arabia Serbia Singapore Slovak Republic Slovenia South Africa South Korea Spain Swaziland Sweden Switzerland Taiwan Thailand Turkey UAE UK Uruguay USA Venezuela Vietnam 94
