User`s manual
USB-3000™
User’s Manual Version 1.6a
Section 2 – Installation
Digital Voice Systems, Inc.
The Speech Compression Specialists
addition, for the usb3kverify.bat file the test vectors (tv.zip file) must be unzipped to the /usb3000/tv
directory. To set up the USB-3000™ run usb3ksetup.bat (see section bin folder contents) as follows:
usb3ksetup.bat [no options]
the response will be
Enter COM Port:
This is the port the USB-3000™ is using (to find what port it is on see section USB COM rate settings). As an
example to set the com port to com number 16 enter the com port as follows:
COM16
the response will be
Enter Baud Rate:
This is the rate the USB-3000™ with communicate over the com port see section USB COM rate settings. The
default factory settings are set to a value of 460800 baud, so enter the rate as follows:
460800
the response will send you back to the command line.
Check to be sure the tv.zip file is unzipped to the /usb3000/tv directory. (See Section tv.zip file contents)
Now run usb3kverify.bat or usb3kversion.bat (See Section bin folder contents)
Page 31
DVSI Confidential Proprietary