User`s manual
USB-3000™
User’s Manual Version 1.6a
Section 2 – Installation
Page 12
Digital Voice Systems, Inc.
The Speech Compression Specialists
2. Installation
2.1. PC Requirements
The USB-3000™ has been tested and run on PCs running Microsoft Windows XP and Vista operating systems.
The USB-3000™ uses the USB 2.0 connection for all communication, system setup, and file I/O.
Figure 11 USB-3000™ Block Diagram
2.2. Installation Steps
Installation of the USB-3000™ USB consists of the following steps:
Step 1. Copy the contents of the USB-3000™ Software CD to the PC as detailed in the next section
Step 2. Connect the USB-3000™ to the PC
Step 3. Install the drivers
Step 4. Verify USB-3000™ Operation
2.3. Copying the USB-3000™ Software disk to the PC
Before installing the USB-3000™, it is recommended to copy the contents of the USB-3000™ CD to the PC.
The USB-3000™ CD contains documentation, software and test vector files that are helpful in installation,
operation and testing.
Windows XP and Windows Vista Operating System
Step 1 Create a folder named C:\usb3000 on the PC.
Step 2 Copy the entire contents of the \usb3000 directory from the CD provided with the USB-3000™
into this folder.
Step 3 Go to the C:\usb3000 directory and unzip tv.zip file to C:\usb3000\tv. This compressed data file
contains test vectors that may be used for vocoder testing.
Step 4 Before continuing review all of the documentation in the C:\usb3000\Docs directory.
The USB-3000™ CD is setup with the following folder structure. For a description of the contents in the folders,
refer to Setction 3.3.
DVSI Confidential Proprietary