User`s manual
USB-3000™
User’s Manual Version 1.6a
Section 1 –
Introduction
Digital Voice Systems, Inc.
The Speech Compression Specialists
1.6.1. Reverting back to DVSI factory settings
To change the USB-3000™ back to the original settings as it was delivered from DVSI follow steps 1 through 5
as described herein. Then follow this Step 6.
Revert Step 6: To change the Product ID from FTDI’s default PID to DVSI’s PID select the USB Device
Descriptor in the left window panel. Expand it by clicking on the “+” sign. Figure 4 Select USB device, then in
the right side window panel click on the FTDI Default pull down menu and select Custom PID. See Figure 10
Reprogram DVSI Product ID.
Then enter the value for the DVSI product ID as
0x8F50
Figure 10 Reprogram DVSI Product ID
Page 11
DVSI Confidential Proprietary