User`s manual
USB-3000™
User’s Manual Version 1.6a
Section 1 –
Introduction
Digital Voice Systems, Inc.
The Speech Compression Specialists
Figure 6 Program default settings to device
The “Program Devices” window [as below Figure 7 Review settings and proceed to program] will appear. From
this interface, select the USB-3000™ device from the “Device List” on the left of the window.
This FTDI program utility window allows for the PID on multiple devices to be reprogrammed all at once just by
selecting multiple devices from the “Device List” on the left hand side of the window.
To program the selected devices press “Program” on the bottom right of the window.
Figure 7 Review settings and proceed to program
Step 8. Verify the USB-3000™ now has the default FTDI Product ID, by right clicking on the USB Device
Descriptor and Click on select the "Cycle Port" button. See Figure 8 Cycle Port This will to re-enumerate the
Page 8
DVSI Confidential Proprietary