User`s manual

USB-3000™
User’s Manual Version 1.6a
Section 1 –
Introduction
Digital Voice Systems, Inc.
The Speech Compression Specialists
Step 6. To change the Product ID from DVSI’s PID to the FTDI’s default PID select the USB Device Descriptor
in the left window panel. Expand it by clicking on the “+” sign. Figure 4 Select USB device Then in the right
side window panel click on the Custom VID/PID pull down menu and select FTDI Default. Figure 5 Select FTDI
default
The value for the FTDI default product ID is 0x6001
Figure 5 Select FTDI default setting
Step 7. To set the Product ID value onto the USB-3000™ select the program icon (the lightening bolt in the
toolbar). See Figure 6 Program default settings to device
Page 7
DVSI Confidential Proprietary