User`s manual

2. Installation
Injury Precautions
WARNING!
If handled improperly, this equipment can be hazardous under certain
conditions. During servicing, this equipment must be handled with care to
avoid high voltage electric shock
Below are precautionary measures that must be considered before
operating the BitLink Decoder
 Do not operate without lid
To avoid electrical shock or fire hazard, do not operate this
product without lid properly attached to the units. Only
qualified personnel should perform servicing.
 Use proper power cord
To avoid fire hazard, use only the power cord supplied with
this products.
 Do not operate in wet or damp conditions
To avoid electrical shock or fire hazard, do not operate this
products in wet or damp conditions.
Product Damage Precautions
WARNING!
Turn off AC power to the chassis before removing or installing printed circuit
assemblies, as this could result in serious damage to the unit’s components.
Below are precautionary measures that must be considered before
operating the BitLink Decoder
 Use proper power source
Do not operate this product from a power source that supplies
more or less than the voltage specified for the products.
 Provide proper ventilation
User’s Manual Installation • 3