User`s manual

VGA
VGA HD output (RGBHV).
Note! Only active for HDTV and if YPbPr is selected, the VGA output
does not have a valid signal.
R/Pr
Pr Colour difference signal or Red depending on the mode chosen in
the menu Output > Video > Analogue Format SDTV and HDTV
respectively.
G/Y/CVBS
Luminance or Green analogue output or Composite PAL/NTSC
output depending on the mode chosen.
B/Pb
Pb Colour difference signal or Blue depending on the mode chosen.
Video Reference Input module (GLK)
The Video Reference Input module can be used to lock the output
video to an external composite video reference as an alternative to the
PCR in the transport stream.
Note! This module is optional.
Video Ref
Composite video reference input with loop through according to ITU-R
Rec. BT.470-3. Needs to be terminated with 75 ohm.
Audio Output module (DAO)
The Audio Output module (DAO) provides 2 channels of both
analogue and digital audio.
Note! This module is optional.
Analogue Out
2 balanced stereo pairs (same as digital outputs) on 1x DB15.
See Appendix A for pin-out.
Note! Analogue audio is only available if the audio is decoded.
AES3 Out 1/2
48kHz unbalanced digital audio outputs (SMPTE276).
User’s Manual Connections • 39