User`s manual

7. Connections
General
The BitLink Decoder has a wide range of input and output interface
modules available and can be configured in a number of different ways.
The following sections will describe the different modules and their
connectors.
ASI module
The ASI module provides dual ASI transport stream input and outputs.
Note! This module is optional.
ASI Out 1/2
DVB-ASI output, BNC 75 ohm (looped from input or any other TS
input module).
ASI In 1/2
DVB-ASI input, BNC 75 ohm.
Lock LEDs indicates when a valid transport stream is provided.
Note! Coaxial cables must be double-shielded.
User’s Manual Connections • 37