User`s manual

Analogue Video (HD)
Select whether the analogue HDTV output format should be RGB or
YPbPr.
Note! If YPbPr is selected, the VGA output does not have a valid signal.
Audio
Audio Output
The settings below are valid for the selected Audio Output.
Service
The service selection provides a list of available audio streams found in
the transport stream. The selection is output to the selected audio
output.
Decoding
The Decoding control selects whether the audio is to be decoded or
sent undecoded (bypassed) to digital audio output 1. Analogue audio is
always provided.
Audio Type
Overrides the audio channel selection by selecting the audio type
(AC-3, MPEG-1 or MPEG-2) manually.
Audio PID
The Program selection in combination with selected Audio Service will
automatically set the Audio PID.
By selecting the checkbox, a PID can be entered manually.
30 • Web Control User's Manual