User`s manual

Demodulator
The controls found in the Demodulator section are used for the
optional QPSK Demodulator.
Frequency
Sets L-band frequency, 950 000 – 2 150 000 kHz
Modulation Mode
Selects RF Modulation mode, Auto, QPSK, 8PSK or 16QAM.
Symbol Rate
Sets Symbol rate, 1 000 000 – 45 000 000 baud.
FEC Rate
Forward Error Correction: Auto, 1/2, 2/3, 3/4, 5/6, 6/7, 7/8 or 8/9.
Note! Some FECs are not available for all modes.
QPSK 1/2, 2/3, 3/4, 5/6, 7/8
8PSK 2/3, 5/6, 8/9
16QAM 3/4, 7/8
Output
Program
The BitLink Decoder scans the transport stream and extracts the
program information. Select the program to output from the list of the
identified programs in the stream.
Video
Output Format
This control selects the video format to be displayed. Current selections
available are:
Transparent SD streams are displayed on the SD output. HD
streams are displayed on the HD output.
SD All streams are displayed on the SD output. HD
streams are downconverted to SD.
HD 1080i All streams are displayed on the HD output. SD
streams are upconverted to HD 1080i.
HD 720P All streams are displayed on the HD output. SD
streams are upconverted to HD 720P.
SD Monitor Type
Determines the aspect ratio of the SDTV monitor (4:3 or 16:9).
28 • Web Control User's Manual