User`s manual

Info
Wizard
Input
Output
Utilities
Set-up
Info
Decoder <ver>
QMC <ver>
QMC FPGA <ver>
DPB <ver>
GLK <ver>
Software
Hardware
Temperature
MAC Addr
Slot 6 QMC<ver><fco>
Slot 8 DPB<ver><fco><cfg>
Slot 1<hw><ver><fco>
Slot 2<hw><ver><fco>
Slot 3<hw><ver><fco>
Slot 4<hw><ver><fco>
Slot 5<hw><ver><fco>
Slot 0 QUC<ver>
QMC <temp F> <temp C>
QCP <temp F> <temp C>
<MAC address>
Software
Info > Software
Displays the software version on the decoder and all the different
modules.
Hardware
Info > Hardware
Displays the hardware version, FCO level and for DPB, the I/O
configuration, on the different modules and in which slots they are
mounted.
Empty slots or modules not detected will be indicated as e.g. “Slot 1 No
board”.
Non-working modules will be indicated as e.g. “Slot 1 ASI Error”
Temperature
Info > Temperature
Displays the temperature on the QMC and the QCP (the power supply)
in both Fahrenheit and Celsius.
MAC Addr
Info > MAC Addr
Displays the Media Access Control (MAC) address of the BitLink
Decoder, e.g. 00:50:C2:11:B2:65.
24 • Front Panel Control User's Manual