User`s manual

Broadcast Addr
Set-up > IP Addr
Sets the Broadcast address of the BitLink Decoder.
Default address is 192.168.80.255.
Netmask
Set-up > Netmask
Sets the Netmask of the BitLink Decoder.
Default Netmask is 255.255.255.0.
Gateway Addr
Set-up > Gateway Addr
Sets the Gateway of the BitLink Decoder.
Default Gateway address is 192.168.80.1.
Network Addr
Set-up > Network Addr
Sets the Network of the BitLink Decoder.
Default Network address is 192.168.80.0.
Network Restore
Set-up > Network Restore
Select Restore to set all addresses to factory default.
Serial Port
Set-up > Serial Port
When Serial is selected as Remote mode, this control is used to select
RS232 or RS422.
User’s Manual Front Panel Control • 23