User`s manual

RF Mode QPSK
RF FEC 3/4
Audio 1 & 2 Stream None
Audio 1 & 2 Decode On
Audio 1 & 2 Type Unknown
Analogue SDTV CVBS
Analogue HDTV RGB
Video ref Pos SD hor. 0
Video ref Pos SD ver. 0
Video ref Pos HD 1080i hor. 0
Video ref Pos HD 1080i ver. 0
Video ref Pos HD 720P hor. 0
Video ref Pos HD 720P ver. 0
1) Settings not listed above are not affected.
SW Upgrade
Utilities > SW Upgrade
Allows software upgrade of the BitLink Decoder via the Ethernet
connection on the QMC module.
See separate instructions included with the new software.
Software upgrade is also possible via the Web interface.
Clear Alarms
Utilities > Clear Alarms
Clears/resets all current alarms indicated on the front panel and via the
alarms connector on the rear.
Note! Executing Clear Alarms will also clear the Event History in the Web
interface.
Store Preset
Utilities > Store Preset
10 presets storing Input/Output settings.
Recall Preset
Utilities > Recall Preset
10 presets recalling Input/Output settings.
User’s Manual Front Panel Control • 21