User`s manual

Type
Output > Audio 1 > Type
Overrides the audio channel selection by selecting the audio type
(AC-3, MPEG-1 or MPEG-2) manually.
PID
Output > Audio 1 > PID
Manual selection of Audio PID if not available in the current program.
Normally the Program selection in combination with Audio Stream
selection will automatically also set the PID.
Audio 2
The settings found under menu Output > Audio 2 are used for audio
out 2. For description of settings see Audio 1 earlier on.
ASI 1
Output > ASI 1
Determines the TS source to be routed to the ASI 1 output. Either ASI
1, ASI 2 or Demodulator (RF) output.
ASI 2
Output > ASI 2
Determines the TS source to be routed to the ASI 1 output. Either ASI
1, ASI 2 or Demodulator (RF) output.
User’s Manual Front Panel Control • 19