User`s manual

Frequency
Input > RF Settings > Frequency
Sets L-band frequency, 950 000 – 2 150 000 kHz
Symbol Rate
Input > RF Settings > Symbol Rate
Sets Symbol rate, 1 000 000 – 45 000 000 baud.
Mode
Input > RF Settings > Mode
Selects RF Modulation mode, Auto, QPSK, 8PSK or 16QAM.
FEC
Input > RF Settings > FEC
Forward Error Correction: Auto, 1/2, 2/3, 3/4, 5/6, 6/7, 7/8 or 8/9
Note! Some FECs are not available for all modes.
QPSK 1/2, 2/3, 3/4, 5/6, 7/8
8PSK 2/3, 5/6, 8/9
16QAM 3/4, 7/8
Video Ref
Input > Video Ref
This control determines whether the video and audio outputs should be
locked to the PCR (from the stream) or to an external video reference
connected to the optional Video Reference module (GLK).
For detailed information on connectors, see Connections, page 37.
Note! When switching video reference, a glitch may appear on the ASI
outputs.
Video Ref Pos
Input > Video Ref Pos
Adjusts the video relative the video ref position up to ±1200 pixels and
±20 lines with 1 pixel/line resolution.
Audio is not affected.
14 • Front Panel Control User's Manual