User`s manual

Wizard menu
Wizard
Input
Output
Utilities
Set-up
Info
Input Source
Program
Audio 1 Stream
Audio 1 Decode
Audio 2 Stream
Audio 2 Decode
ASI 1
ASI 2
RF 1
RF 2
Auto Tune
Manual PID
<Select Program>
<Select Stream>
On
Bypass
<Select Stream>
On
Bypass
The Wizard is used to quickly set up the BitLink Decoder. More
advanced settings are available in the other menus.
 Confirm and go to next menu item by pressing Enter.
 Use Up and Down arrows to step between menu items.
 Exit the Wizard by pressing Cancel.
Input Source
Select which input (ASI 1, ASI 2 or RF) to be used.
Program
Select which Program in the transport stream to decode.
Audio 1 Stream
The channel selection provides a list of available audio streams found in
the transport stream. The selection is output to audio out 1.
Audio 1 Decode
The Decode control selects whether the audio is to be decoded (on) or
sent undecoded (bypass) to digital audio out 1.
Audio 2 Stream
The channel selection provides a list of available audio streams found in
the transport stream. The selection is output to audio out 2.
Audio 2 Decode
The Decode control selects whether the audio is to be decoded (on) or
sent undecoded (bypass) to digital audio out 2.
12 • Getting Started User's Manual