User`s manual

3. Getting Started
General
This section will quickly guide you through the basics of operation and
how to connect and set up the BitLink Decoder from the front panel.
Front Panel operation
BitLink Decoder front panel
Display
The display on the front of the BitLink Decoder is a 2x24 character
backlit LCD display and is used to show status, menu selections and
settings.
Status Menu
When powering up the BitLink Decoder, the Status menu appears. The
Status menu has four different pages, which are navigated using the left
and the right arrow button.
Main status and video format
Prg_3_ASI1_PCR_DD
1080i_>_480i_CC_EA
Selected
program
Video stream
format
Video output
format
Selected
input source
Selected
reference
Audio 1 & 2 format
D = Dolby Digital (decode)
d = Dolby Digital (bypass)
M = MPEG (decode)
m = mpeg (bypass)
Embedded
Audio
Closed
Caption
Remote
mode
User’s Manual Getting Started • 9