User`s manual

Electrical power connection
WARNING!
The equipment must be grounded to avoid electrical shock. Failure to ground
the unit may cause equipment damage and/or personal injury. Particular
attention should be given to supply connections when connecting to power
strips rather then direct connections to branch circuits.
Physical Data
Height 1RU
Width 19” (483 mm)
Depth 18.1” (461 mm)
Weight (approx)
1)
9 kg
Power (Max)
1)
60 W
Voltage 90-120 V /60 Hz
Fuse 2.0 A (slow)
1) Depending on configuration
Also see Appendix E for full specification.
Mounting the BitLink Decoder
The BitLink Decoder has forced cooling with airflow from left to right.
When installing the BitLink Decoder, it must be placed so that there is a
gap of minimum 1 inch (25 mm) on the both sides of the unit to allow
for proper cooling.
1 inch 1 inch
Top view
Front
Air
flow
User’s Manual Installation • 5