MOSS-DVR-810 Mobile Digital SD Recorder User Manual Before installing and using, be sure to read this Manual for best performance.
ATTENTION This product is to be used within the vehicle interior. In order to prevent shortcircuit or the risk of electrical shock, do not use this product within a wet environment. In the event of any foreign solid or liquid entering the DVR, please disconnect the power immediately, and have a qualified technician confirm safe operation. The product is high-tech equipment, with no user-serviceable parts. Please refer all service to qualified technical personnel.
Contents Installation Environment ................................................................................................. 2 Packing List ...................................................................................................................... 2 Product Overview ............................................................................................................ 3 Features .........................................................................................
Features Operating System Embedded Linux operating system for stability Simple Menu User-Interface. Graphical on-screen display. Video Compression Standard H.264 Video Format: Excellent images, and the most efficient bit stream. Surveillance and Video Processing Surveillance: 4 channels D1 video (PAL: 720 * 576, NTSC: 720 * 480) Recorder: Total resources 100 PAL, 120 NTSC.
Technical Parameters Items Item Name Item Number Solutions Operation Interface Password control Video Input System Video Video Output Video Display Video standard System resources Audio Input Audio Output Basic Output Level Distortion Plus Noise Recording Mode Audio Compression Image Compression Image format Audio Digital Processing & Storage
Optional Features GPS module Ports (one RS-232, one RS-485, cradle head control, PELCO-D, Baud rate 9600, address code 0x01) 3G module Intercom function Installation Instructions External Interface Wiring Audio Input RS 232 (RX) 12V RS 232 (TX) EXTEND Ground Ground Audio Output Video Output Alarm Input 3 Alarm Output Alarm Input Ground RS 485 Alarm Input 1 RS 232 (TX) SENSOR Alarm Input
4-pin Connector Layout CH1 CH2 CH3 CH4 3G/GPRS SENSOR EXTEND GPS DEBUG Remarks: If the power supply is 12V, then the current of 12V ouput is limited to 1A. If there are more than 3 cameras, we suggest that customers get power for other cameras from the 12V vehicle power directly.
Using the DVR Front Panel PWR RUN GPS SD1 ACC REC 3G SD2 IR VIDEO USB 2 LED PWR LED: Lit when system is active. Power LED on. RUN LED: LED flashes when during normal operation. SD LED: Flashes when recording, playing back or backing up. GPS LED: GPS activity indicator. 3G LED: 3G activity indicator.
Remote Control Operation Select Camera 2 Select Camera 1 (REC/PLAY) 1 2abc (REC/PLAY) Select Camera 3def 3 (REC/PLAY) Select Camera 4 (REC/PLAY) 4ghi 5jkl 6mno 7pqrs 8tuv 9wxyz 0 Display all (REC/PLAY) Enter Menu ESC MENU Increase Value Navigate Left OK Record Navigate Right Confirm Decrease Value PTZ A-B REC
Menu Setup In Live (non-recording) mode, press MENU. If this the first time entering the MENU, the system will display “ENTER THE PASSWORD” (The default password is 6666). When finished, press OK to exit the MENU interface. In Record mode, please press STOP to stop recording, then press MENU to enter the MENU interface. Settings: To set up items as below TIME: Sets the time. CAR LICENSE: Sets the vehicle ID number. VIDEO MODE: Sets the video standard (NTSC or PAL).
Video download: Connect USB Flash Drives or HDD to USB interface in front of the DVR Shift to “Playback menu”, select target video for download by Remote control, press “OK” to start copy. Repeat for each section. Alarm: Alarm record time: 10-90 seconds since alarm record. GPS Transmission Interal: GPS signal transmission interval Network: DOMAIN NAME: Used for 3G real-time viewing--Sets server domain. SERVER PORT: Used for 3G real-time viewing--Sets server port.
