Manual VF-215WHD-OF 21.5” HD OpenFrame VideoFlyer Version 1.
Revision History Amendment Date September 2010 December 2010 July 2011 Version V1.0 V1.1 V1.
Table of Contents 1 Introduction .............................................................................................................. 4 2 System ..................................................................................................................... 5 3 Instructions ............................................................................................................... 6 3.1 Preparation ............................................................................................
1 Introduction The DV Signage 21.5” HD VideoFlyer is a self-contained LCD display and network digital media player for continuous (looped) play of HD 1080p video stored on a CF (Compact Flash) memory card. The unit comprises a widescreen 21.5” color TFT LCD and optional touch screen. A range of other accessories and factory installed customization options are also available, these are not be covered in this manual.
2 System 21.
3 Instructions CAUTION: Never connect or disconnect parts of the system when the system is powered up as this may cause serious damage. 3.1 Preparation VideoFlyers are designed to be as plug and play as possible requiring the minimum of setup for use. The following describes the operation of the standard version, there are however a number of options available and these may affect the preparation required.
3.3 Powering On Install the Compact Flash card, however to reduce the risk of errors it is advised to have the power off when removing or installing a Compact Flash card. Connect the provided external AC power supply unit. Power on the unit using the on/off switch, the power LED should come on. (Note: This Openframe version (VF-215WHD-OF), the power is default to “Auto on”.) See the following section for Power On options. 3.
Simple play mode, i.e. files copied to Compact Flash without using DV Studio: In simple play mode, the user just copies all video files (.mpg) or JPEG files (.jpg) onto the Compact Flash card. The VideoFlyer will play these files in alphabetical sequence. For JPEG files, the play time is determined by the last digit of the filename. (For example: APPLE5.mpg, where “5” means the track will be displayed for 5 seconds.) Note: Do not use the same filename on both MPEG and JPEG.
4 Touch Screen Operation (only applicable in touch screen option) 4.1 Touch segments The VideoFlyer’s button control can be performed via touch screen for panel sizes of 21.5” (Fig. 1) Fig.1 8-buttons for LCD screen sizes 21.5” Button function settings Each button function can be programmed with the DV Studio software to perform a DVD type player mode function or specific track select function. The DV Studio software is available separately.
4.2 Configuration mode To enter OSD configuration mode, hold touch segment #8 and power on until the OSD menu screen is shown as follows: Configuration Mode MAC: 000562010406 Kernel Version: V2.83.01.10 Version: V1.08.
Dimensions 62.5 50 296 268.1 View Area 13.95 31.7 296 540 476.6 View Area 31.7 125 4.5 holes 12x for user mounting 13.95 typ 4.5 260 63.5 66.5 25.5 66.5 38 20.4 RJ-45 499.2 DC 12V input 20.4 On/Off Switch 5 VideoFlyer 21.
6 Specification Playback video format Video storage 1. MPEG-1 video (Video-CD), MPEG-2 video (DVD), MPEG4 (DivX, H.264) 2. JPEG picture CompactFlash memory cards LCD display Color TFT Screen size 21.5” (Diagonal) Screen active area 476.6(H) x 268.
WARRANTY The products are warranted against defects in workmanship and material for a period of one (1) year from the date of purchase provided no modifications are made to it and it is operated under normal conditions and in compliance with the instruction manual. The warranty does not apply to: Product that has been installed incorrectly, this specifically includes but is not limited to cases where electrical short circuit is caused.
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Contact Details USA: 18440 Technology Drive Building 130 Morgan Hill, CA 95037 Tel: (1) 408-782 7773 Sales: info@dvsignage.com EUROPE: The Lake House, Knebworth Park, Hertfordshire, SG3 6PY UK Tel: +44 (0)20 7631 2150 Sales: info@dvsignage.com ASIA: Fax: (1) 408-782 7883 Fax: +44 (0)20 7631 2156 th 16 floor Millennium City 3 370 Kwun Tong Road Kwun Tong Hong Kong Tel: (852) 2861 3615 Sales: hk@dvsignage.com Fax: (852) 2520 2987 www.dvsignage.
