Specifications

Page 8 of 15
Simple play mode, i.e. files copied to Compact Flash without using DV Studio:
• In simple play mode, the user just copies all video files (.mpg) or JPEG
files (.jpg) onto the Compact Flash card. The VideoFlyer will play these
files in alphabetical sequence.
• For JPEG files, the play time is determined by the last digit of the filename.
(For example: APPLE5.mpg, where “5” means the track will be displayed
for 5 seconds.) Note: Do not use the same filename on both MPEG and
JPEG.
Note: Make sure all capital letters in a filename defined in playlist are consistent
with the filename on CompactFlash card. All filenames should be in 16+3 format
and avoid using any characters like “~”, “_”, “-“, etc. All content files must be
stored within a folder name MEDIA. (i.e. /Media/)
3.6 Configuration mode
In OSD configuration mode, you may use push buttons (L1, L2 and L3) or 8-
segmented touch screen to operate.
To enter OSD configuration mode, hold touch segment #8 (or L1) and power on
until the OSD menu screen is shown as follows:
Push button
(L1/L2/L3)
Configur ation Mode
MAC: 000562010406
K ernel Vers ion: V 2.83.01.10
V ersion: V 1.08.10 RP -500
V olume: 16
TZ:+0 Y Y :09 MM: 11 DD:19 hh:15 mm:54 s s :50
OS D: ON Datalog: ON
S y s tem Mess age: ON
S ave and Exit
7
8
1
8-se g ment To u ch scr een
2
3
4
5
6
L1
L2
L3
 Press button L1 (or #8 touch segment) to select option
 Press button L2 / L3 (or #6 /#7 touch segment) for change value
 Press button L2 (or #7 touch segment) to confirm ‘SAVE and EXIT”