VIDEO FLYER 21.5” (VF-215WHD, VF-215WHD-OF) Manual Version 1.
Revision History Amendment Date September 2010 December 2010 Version V1.0 V1.
Table of Contents 1 Introduction ....................................................................................4 2 System ...........................................................................................5 3 Instructions.....................................................................................6 3.1 Preparation .............................................................................6 3.2 Compact Flash ........................................................................6 3.
1 Introduction The Digital View 21.5” HD VideoFlyer is a self-contained LCD display and network digital media player for continuous (looped) play of HD 1080p video stored on a CF (Compact Flash) memory card. The unit comprises a widescreen 21.5” color TFT LCD, a built in speaker and optional touch screen. A range of other accessories and factory installed customization options are also available, these are not be covered in this manual.
2 System 21.5” HD VideoFlyer (VF-215WHD) A robust metal housing with powder coating: USB port 100 8x M 4-Threadholes 75 CF Card compartment M4 VES A75 LAN VES A100 Remote Ext. (#1 - #8) L1 (Button 8) + power up - Config menu L1 (Button 8) - Select L2 (Button 7) - + / Save and exit L3 (Button 6) - - / Save and exit Line out (Stereo phone jack) 1. COM port 2. Coaxial (option) Speaker (R) Power: DC 12V Volume Control On/O ff switch Power LED Speaker (L) IR sensor 21.
3 Instructions CAUTION: Never connect or disconnect parts of the system when the system is powered up as this may cause serious damage. 3.1 Preparation Digital View VideoFlyers are designed to be as plug and play as possible requiring the minimum of setup for use. The following describes the operation of the standard version, there are however a number of options available and these may affect the preparation required.
3.3 Powering On • Install the Compact Flash card, however to reduce the risk of errors it is advised to have the power off when removing or installing a Compact Flash card. • Connect the provided external AC power supply unit. • Power on the unit using the on/off switch, the power LED should come on. (Note: In Openframe version (VF-215WHD-OF), the power is default to “Auto on”.) See the following section for Power On options. 3.
Simple play mode, i.e. files copied to Compact Flash without using DV Studio: • In simple play mode, the user just copies all video files (.mpg) or JPEG files (.jpg) onto the Compact Flash card. The VideoFlyer will play these files in alphabetical sequence. • For JPEG files, the play time is determined by the last digit of the filename. (For example: APPLE5.mpg, where “5” means the track will be displayed for 5 seconds.) Note: Do not use the same filename on both MPEG and JPEG.
4 Touch Screen Operation (only applicable in touch screen option) 4.1 Touch segments The VideoFlyer’s button control can be performed via touch screen for panel sizes of 21.5” (Fig. 1) Fig.1 8-buttons for LCD screen sizes 21.5” Button function settings Each button function can be programmed with the DV Studio software to perform a DVD type player mode function or specific track select function. The DV Studio software is available separately.
4.2 Configuration mode To enter OSD configuration mode, hold touch segment #8 and power on until the OSD menu screen is shown as follows: Configuration Mode MAC: 000562010406 Kernel Version: V2.83.01.10 Version: V1.08.
5 Dimensions 66.2 516 19.7 476.6 19.7 V iew Area 30.2 36 V iew Area = 476.6 x 268.1mm 38 38 440 516 100 8x 75 M 4-Threadholes M4 VES A75 VES A100 Power: DC 12V VideoFlyer 21.
31.7 476.6 540 View Area 31.7 typ 4.5 4.5 holes 12x for user mounting 260 63.5 66.5 20.4 499.2 20.4 VideoFlyer 21.
6 Specification Playback video format 1. MPEG-1 video (Video-CD), MPEG-2 video (DVD), MPEG-4 (DivX, H.264) 2. JPEG picture Video storage CompactFlash memory cards LCD display Color TFT Screen size 21.5” (Diagonal) Screen active area 476.6(H) x 268.
WARRANTY The products are warranted against defects in workmanship and material for a period of one (1) year from the date of purchase provided no modifications are made to it and it is operated under normal conditions and in compliance with the instruction manual. The warranty does not apply to: • Product that has been installed incorrectly, this specifically includes but is not limited to cases where electrical short circuit is caused.
CONTACT DETAILS USA: EUROPE: Digital View Inc. 18440 Technology Drive Building 130 Morgan Hill, CA 95037 Tel: (1) 408-782 7773 Sales: ussales@digitalview.com Digital View Ltd 6 Marylebone Passage London W1W 8EX UK Tel: (44) (0)20 7631 2150 Sales: uksales@digitalview.com ASIA: Fax: (1) 408-782 7883 Fax: (44) (0)20 7631 2156 Digital View Ltd 16th Floor Millennium City 3 370 Kwun Tong Road Kwun Tong Hong Kong Tel: (852) 2861 3615 Sales: hksales@digitalview.
