MSDS

ManualsBrandsDigital Treasures ManualsElectricalPower Flask 13000 mAh Portable Power Bank - Black

Shenzhen NTEK Testing Technology Co., Ltd.

Address: 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao’an District, Shenzhen P.R. China.

Tel: (86)-0755-61156588 Fax: (86)-0755-61156599 Http: www.ntek.org.cn

Material Safety Data Sheet

For

Shenzhen

Pow-Tech New Power Co.,Ltd.

Room 1102,Xinhua insurance Mansions,Mintian Road,Central District,Shenzhen,China

And for their product

Li-ion Polymer Battery

Model/type reference........................: 356799

Nominal Voltage ...............................: 3.7V

Typical Capacity ...............................: 2400mAh (8.80Wh )

Weight...............................................: 44.0g

T: 3.50±0.5mm

W: 67.0 ±0.5mm

Shape and Physical Dimension

(mm) .................................................:

L: 99.00±0.5mm

Version number ................................:

V1.0

Revision date....................................:

N/A.

Laboratory .......................................:

Shenzhen NTEK Testing Technology Co., Ltd.

Address ...........................................: Building E, Fenda Science Park, Sanwei Community, Xixiang

Street, Bao’an District, Shenzhen P. R. China

Compiled by (name+ signature) ..:

Gary wu

Approved by (+ signature) ...........:

Kevin Zou

NTEK-2014DC05150005S

Summary of content (9 pages)

PAGE 1
NTEK-2014DC05150005S Material Safety Data Sheet For Shenzhen Pow-Tech New Power Co.,Ltd. Room 1102,Xinhua insurance Mansions,Mintian Road,Central District,Shenzhen,China And for their product Li-ion Polymer Battery Model/type reference........................ : 356799 Nominal Voltage ............................... : 3.7V Typical Capacity ...............................: 2400mAh (8.80Wh ) Weight...............................................: 44.0g Shape and Physical Dimension T: 3.50±0.5mm (mm) ..........
PAGE 2
NTEK-2014DC05150005S Section 1- Chemical Product and Company Identification Product Identification: Li-ion Polymer Battery Model: 356799 Manufacture’s/ Supplier Name: Shenzhen Pow-Tech New Power Co.,Ltd. Room 1102,Xinhua insurance Mansions,Mintian Road,Central District,Shenzhen,China Telephone number of the supplier: +86-755-82721259 Emergency Telephone No. (24h): +86-755-82721259 Fax: +86- 755-82721250 Preparation Date: 2014-05-15 This MSDS was prepared by Shenzhen NTEK Testing Technology Co., Ltd.
PAGE 3
NTEK-2014DC05150005S Aggravated by Exposure Reported as carcinogen Not applicable Section 3 – Composition/Information on Ingredients Li-ion Polymer Battery is a mixture. Hazardous Ingredients Concentration or concentration (Chemical Name) ranges (%) Lithium Cobalt Oxides CAS Number 20-30% 12190-79-3 15-20% 7782-42-5 0.5-2% 24937-79-9 Copper Foil (Cu) 5-10% 7440-50-8 Aluminum Foil(Al) 5-10% 7429-90-5 10-15% 21324-40-3 Polyethylene (C2H4)n 0.
PAGE 4
NTEK-2014DC05150005S contaminated eye(s) with lukewarm, gently flowing water for at least 30 minutes while holding the eyelids open. Neutral saline solution may be used as soon as it is available. If necessary, continue flushing during transport to emergency care facility. Take care not to rinse contaminated water into the unaffected eye or onto face. Quickly transport victim to an emergency care facility.
PAGE 5
NTEK-2014DC05150005S Section 6 – Accidental Release Measures Personal Precautions, protective equipment, and Restrict access to area until completion of emergency procedures clean-up. Do not touch the spilled material. Wear adequate personal protective equipment as indicated in Section 8. Environmental Precautions Prevent material from contaminating soil and from entering sewers or waterways. Methods and materials for Containment Stop the leak if safe to do so.
PAGE 6
NTEK-2014DC05150005S other metal objects. Keep out of reach of children. Do not expose Li-ion Polymer Battery to heat or fire. Avoid storage in direct sunlight. Do not store together with oxidizing and acidic materials. Section 8 – Exposure Controls and Personal Protection Engineering Controls Use local exhaust ventilation or other engineering controls to control sources of dust, mist, fumes and vapor. Keep away from heat and open flame. Store in a cool, dry place.
PAGE 7
NTEK-2014DC05150005S Melting point/freezing point Not available. Boiling Point, initial boiling point and Boiling range: Not available. Flash Point Not available. Upper/lower flammability or explosive limits Not available. Vapor Pressure: Not applicable Vapor Density: (Air = 1) Not applicable Density/relative density Not available. Solubility in Water: Insoluble n-octanol/water partition coefficient Not available. Auto-ignition temperature 130°C Decomposition temperature Not available.
PAGE 8
NTEK-2014DC05150005S occurs, irritation to the skin, eyes and respiratory tract may occur. Sensitization Not Available Neurological Effects Not Available Teratoaenicitv Not Available Reproductive Toxicity Not Available Mutagenicity (Genetic Effects) Not Available Toxicologically Synergistic Materials Not Available Section 12 - Ecological Information General note: Water hazard class 1(Self-assessment): slightly hazardous for water.
PAGE 9
NTEK-2014DC05150005S non-dangerous goods; Concorde’s Li-ion Polymer Battery complies with the UN Recommendations on the Transport of Dangerous Goods; IATA Dangerous Goods regulations, and applicable U.S. DOT regulations for the safe transport of Li-ion Polymer Battery. The Li-ion Polymer Battery according to NEW PACKING INSTRUCTION 965~967 Section Ⅱ of IATA DGR 55th edition for transportation.