User Guide

18
DS1 User Manual
2. CONTROL / Setup page
Setup Page
Allows the user to alter specific function-
ality and check working information about
the PSU and light module.
To navigate between the DS DMX page,
SETUP and WiFi pages, press OK when the
page name is highlighted and use the jog
wheel.
1. Remote - indicates the remote control
mode either DMX(Wired), Art-Net(Wire-
less) or OFF.
Select OFF to stop control by an outside
device if you intend to control your lights
from the PSU.
2. DS Mode- When turned on, the PSU will
run on DS Mode, which is a subset of the
full mode of operation, which is the DMX
mode used when DS Mode selection is set
to OFF.*
DS mode is a more simplistic approach to
DMX setup, eliminating the need to orien-
tate between DMX modes, universe selec-
tion and also making channel numbering
less cumbersome.
• DS mode is primarily meant to use
with DS DMX app for iOS. If using any
other control devices or controller
boards switch DS mode to OFF.
*Please refer to “DS DMX” section for more.
1
2
3
4
Setup page
5