User Guide

13
DS1 User Manual
1. HARDWARE / Module setup
Module setup
The DS1 PSU has two eccentric lock mounts.
One on the short and one on the long side of
the PSU. The mounting procedure is identical
to the tripod setup.
The “default” mounting point for the module
is on the short side of the PSU. It is import-
ant to make sure before the Light Module is
Fastened to know the orientation of the PSU
so that the input sockets of the PSU (DMX IN,
AC/DC) would be facing downwards. This en-
sures that they would not get contaminated
with water or other impurities.
The Eccentric Lock socket on the long side
of the PSU is for fitting the light module so it
can be directed upwards or downwards. This
position allows more tilt using the tripod and
is the correct way to assemble the fixture
when using SoftBlade accessory.
When mounting the light fixture always se-
cure the PSU and also the light module via
the security washer positioned on the back
corner of the Light Module.
Lock socket